Karl Dahm 12803 Set of 100 Hood for Tile Levelling System in Box

• Pack of 100 Black Draw Hoods for Karl Dahm Tile Laying System Levelmac - Tiles Precise and Even with Karl Dahm Tools
• With the tile levelling system, you can easily lay tiles completely flat.
• The reader of the trade journal "Tiles & Plates" voted our levelling system as the Product of the Year 2013.
• Karl Dahm tiling tools in top quality

How it works: 1. Step: pull the adhesive bed as usual, for large-format tiles (approx. From format 60 x 60 cm) it is recommended to use the butter floating process. Then insert the first tile. 2. Step : Place 1-2 base threaded tabs along the edge of the tile where the next tile is to be applied, so that half of the tab base sits under the tile. 3. Step: Place the next tile on the first tile so that the threaded tabs in the joint between the tiles. Now turn the hoods onto the thread of the base tabs. Do not turn it completely first, only when all pull hoods are in direct all hoods can be screwed on. So the tiles are now raised or lowered to the same level. 4. Step: proceed across the entire surface to be laid out. As long as the adhesive bed is still wet, the hoods can be tightened at any time, but you should not enter the tiles as long as the adhesive is still damp. 5. Allow the adhesive bed to fully harden. Then the reusable hoods are turned and collected, while the threaded tabs with the lower part remain in the adhesive and at the predetermined breaking point under the thread can be broken off and disposed of. The base of the threaded tabs is grouted and is no longer visible after breaking off.