KAHEIGN 15Pcs Hot Glue Sticks, 270 x11mm Black Hot Melt Glue Sticks for Car Body Dent Repair Remover Crafts DIY Home Office Projects

• [High quality] Made of environmentally friendly EVA material, non-toxic and harmless, high viscosity with fast adhesion, suitable for removing car dents without leaving any residue or causing paint to fall off
• [High temperature resistance] The melting point of the black dent repair glue stick is 150℃~160℃, the softening point is 120℃, not easy to melt, suitable for fixing electronic components and PC boards
• [Easy to use] Compatible with 60W and 100W glue guns, easy to operate, no paint repair, easy to remove, just use alcohol and clean damp cloth to clean the residue
• [Size] 270 x 11mm, after installing the glue stick on the glue gun for 5-8 minutes, put the glue on the pull ring, then put it on the dent, use the tool to pull the ring, and finally remove the glue with special remover
• [Applicable] Suitable for the surface of automobiles, metal plates, refrigerators, washing machines, etc, but also for crafts, artificial flowers, models, plush toys, PC boards, electronic parts, leather goods, ceramic tiles, plastics, woodworking wood, cardboard, etc

KAHEIGN 15Pcs 270 x11mm Black Hot Glue Sticks suitable for the surface of automobiles, metal plates, refrigerators, washing machines, etc, but also for crafts, artificial flowers, models, plush toys, PC boards, electronic parts, leather goods, ceramic tiles, plastics, woodworking wood, cardboard, etc. Feature: - Made of environmentally friendly EVA material, non-toxic and harmless, high viscosity with fast adhesion. - The melting point of the black dent repair glue stick is 150℃~160℃, the softening point is 120℃, not easy to melt. - Compatible with 60W and 100W glue guns, easy to operate, no paint repair, easy to remove. How To Use: 1. Clean the dents with a clean, damp cloth. 2. Put the glue stick into the glue gun, pull the trigger to make the glue stick enter the glue gun, turn on the power and warm up for 5 minutes. 3. Use a suitable pull gasket. Larger dents require larger stretch shims. (Note: The larger the pull-out gasket, the greater the pull-out force). 4. Pull the trigger and apply the extruded glue to the extrusion gasket (the 4 holes of the gasket should be coated with hot melt). 5. Use a hot melt adhesive to quickly place the pull tab in the center of the dent and gently press until the glue cures and sticks (allow the glue to cool for about 8 minutes. The cooling time should be less than 10 minutes and should be slightly shorter). winter). 6. Align the T-shaped repairer and pull the washer with hot melt adhesive and pull the slide back to pull up the dent. 7. Check with the circuit board. If the dent still exists, tap it gently with a flat hammer or pen. 8. Clean the repaired area with a clean, damp cloth. Specification: Material: EVA Size: 270 * 11mm Colour: Black The softening point: 120℃ The melting point: 150℃~160℃ Packing Included: 15 x Glue Stick.