Kafuty Graphite Crucible Set, Ingot Mold Set High Purity Graphite Crucible + Tong + Bowl + Combo Ingot Torch Melting Kit High Purity High Strength, Durable

• 【High heat resistance】 high impact resistance and corrosion resistance
• 【Mainly used in dental alloys】 Platinum, gold, silver, copper, brass and other high temperature melting alloys
• 【High temperature】 over 2800 degrees
• 【High purity and high strength】 durable in use
• 【Choose Quartz Glass】 as the main raw material, which is made with advanced ceramic processing technology

Specification: Name: 6-port SATA3.0 expansion card Model: PCE6SAT-M01 Master control: for marvell 88SE92xx+109X Interface: PCI-E 1x, 2x, 4x, 8x, 16x Support system: for WINXP / WIN7 / WIN8 / WIN10 / LINUX Bus interface: PCI-Express x1 slot Expansion interface: 6 SATA3.0 interfaces Product size: approx. 12 * 10 * 2cm / 4.7 * 3.9 * 0.8inch The PCIE to SATA3.0 riser card is used as follows: First, the system disk and PCIE to SATA3.0 riser card connection conditions and solutions: 1. The SATA interface mode of PCIE to SATA3.0 is AHCI mode. If you want to plug in the system disk on our card, the premise is that your system disk must be installed in AHCI mode when installing the system on the motherboard. Otherwise, the system cannot be started through our transfer card. 2. If it is determined that the SATA interface installation system of the system disk inserted in the motherboard is AHCI mode, then you can directly insert the hard disk into our card, and then enter the motherboard BIOS to set the system disk as the first boot. 3. If the above two conditions are met, if the hard disk interface of the motherboard still fails to start, or restarts repeatedly, it may be caused by the conflict between the hard disk interface of the motherboard and our transfer card. The solution is to enter the motherboard BIOS and set the hard disk interface option of the motherboard to Disabled, then save and restart to start the system Package List: Riser card *1 Half height baffle *1