Juwacoo 2 Pcs Wet Room Floor Barrier, 1m & 2m Self-Adhesive Shower Screen Seal Strip, Rubber Curved Shower Screen Seal, Bathroom Sealant Strip, Shower Water Blocker Splash Guard Strip (White)

• 【Premium Rubber Material】Crafted from high-quality rubber, this wet room floor barrier is , flexible and to mold and mildew, helping to keep your bathroom cleaner for longer. The sturdy construction stands up to daily use without cracking, deforming or discoloring, providing reliable protection in wet environments.
• 【Dimensions and Triangular Groove Design】This flexible shower screen seal comes in two lengths: one 2m long and 4cm high, and one 1m long and 4cm high, providing ample coverage for most openings. The soft, smooth edges feel comfortable underfoot and 't hurt your feet. The triangular groove profile helps retain within the shower area, meeting greater water retention and splash protection needs.
• 【Effective Water Containment】This self-adhesive shower splash guard is designed to block water from escaping the shower area, helping maintain a dry, safe bathroom floor and reducing slip hazards. The low-profile, streamlined design fits seamlessly against tiles and trays, directing water back toward the drain while complementing modern bathroom decor.
• 【Customizable Fit】The flexible rubber shower threshold water barrier bends easily to create curves around corners and edges, adapting to most shower trays, wet rooms and irregular layouts. It can be trimmed to the desired length for sinks, bathtubs, countertops and other water-prone areas, providing a tailored, snug seal where you need it most.
• 【Convenient Installation】Simply clean and dry the thoroughly, measure and cut the barrier to size, then peel off the backing and firmly the adhesive strip onto the smooth floor or tray. For a stronger, longer-lasting seal, you can apply silicone along both edges. Allow at least 24 hours of drying time before exposing to water for optimal adhesion.

Cautions: In order to achieve stable and lasting effect, please pay attention to the follow question This floor seal suit for kinds of Smooth flat floor, such as smooth marble floor, coating floor and other smooth . can not use for Severe sags and crests floor, big floor and Mosaic glass floor. Purchase a size that is 5cm-10cm longer than the required length ! use with silicone sealant: Fill the between the walls with the two ends of the water barrier and all around of bottom by silicone sealant to achieve a completely hermetic effect, remove the excess glue to make the contact smooth. Clean the ground and dry it before installation! Not peeling all of sticker one-time: Mark the position and measure suitable length before peeling sticker, peeling sticker little by side and then the peeled position to the as the same time, then peeling left little by little. Not peeling all of sticker for one-time and pull up the water retaining strip if found its not install well. After the installation is completed, it needs to be dry for 24 hours, and it needs to be postponed for 1-2 days in autumn and winter. Installation Method: Measure:Measure the length and width of the countertop, In the corner, we recommend you cut it to 45 degree, and then connect two part to its firmness. Tear off the adhesive: in this process avoiding dust on the adhesive strip and affecting its adhesion. Paste: apply the water dam seal gently and slowly, keeping it horizontal or vertical, pressing gently with your fingers. Glue:The most important and necessary step is to fill the bottom of the water retention strip with caulk to a long-lasting and strong adhesion.