Jopto 2Pcs Brushless Fan DC 24V Cooling Fan 4010 0.06A 40mm x 40mm x 10mm 3D Printer Fan Hydraulic Turbo Cooling Fan with XH2.54-2P Wire for 3D Printer

• Made of high quality ABS material, the fan is very sturdy and durable. 40mm Brushless DC Cooling Fan with 2 Pin connector. With high performance and low noise.
• Rated Voltage: DC 24V, Current: 0.06A; SpeedRated Voltage: DC 24V, Current: 0.06A; Speed: 6800±10%RPM , Noise: 25dBA.6800±10%RPM , Noise: 25dBA.
• Bearing Type: Hydraulic Bearing. Dimensions: 40 x 40 x 10mm(1.6 x 1.6 x 0.36inch).
• Connector: 2 Terminal Connector with 2pin-ph2.54; Wiring: red wire is connected to positive pole, black wire is connected to negative pole.
• Polarity Protection: 1. When Vcc is reversely connected to GND, it does not conduct.(Open circuit when Vcc andamp; GND are exchanged) 2. When Vcc is reversely connected to GND, 5 seconds pull out will not burn the board.

Features: Connector: 2 Terminal Connector with 2pin-ph2.54; Wiring: red wire is connected to positive pole, black wire is connected to negative pole. When Vcc is reversely connected to GND, it does not conduct.(Open circuit when Vcc andamp; GND are exchanged). When Vcc is reversely connected to GND, 5 seconds pull out will not burn the board. Model: 4010 Blower Fan Rated Voltage: DC 12V Rated Current: 0.06A Acoustic Noise: 25dBA Rated Speed: 6800±10%RPM Connector: 2pin-ph2.54 DC Line Length: 300mm Rotation Direction: Clounter-clockwise Iife Expectance: 50,000 hours at 25 degree Size: 40x40x10mm Screw Hole Diameter: 1.5mm Weight: 11.6g Package Content: 2 x 4010 24V 0.06A Brushless DC Cooling Fan