JJC Camera Tripod Remote Control Lanc Camcorder Controller for Sony A9III A7RV A7IV A7III A7 A6000 A6600 A6400 A6500 RX100VII VI IV RX10IV ZV-1 FX3 FDR-AX53 AX55 AX700 HDR-CX240 CX405 CX625 & More

• WIRED LANC/MULTI PORT REMOTE CONTROL: The camera remote controller is especially designed for Sony camera/ camcorder with a Multi/ LANC terminal. Control your camera/camcorder by using a cable connected to the multi/LANC port, which can make your operation more convenient and flexible, allowing you to focus on the shot you want to capture.
• AVAILABLE FUNCTIONS: This detachable wired remote commander features power on/off, video/still image recording, zooming, slow zooming, locking function and displaying grid lines.
• CONVENIENT & PRACTICAL: The lanc remote control can be mounted on a tripod with a diameter of 0.4"-1.4"/10mm-35mm through the mounting clip, and supports rotation and positioning at 10-degree intervals to adjust the remote angle, which helps to control the camera direction and Use the remote control at the same time.
• HIGH QUALITY: Silicone pads designed inside the handle clip are for closer clamping and protect tripod handle from scratching. Constructed from premium aluminum alloy, the pan bar is sturdy and provides years of reliable use.
• COMPATIBILITY: Use for Sony FX30 A7IV A7RV A7RIV ZV-1 A7S A7III II A7 A1 A9III A9 A6600 A6500 A6400 A6300 A6000 RX100VII VI RX10IV III FDR-AX53 AX55 AX700 HDR-CX240 CX405 CX625 CX675 CX900 CX680 CX280E PJ410 PJ820 PJ790 PJ660 PXW-Z150 Z190 Z280 PXW-X180 X160 FS5 HXR-NX200 NX100 NX5R

Description JJC Camera Tripod Remote Controller is especially designed to work with Sony camera/ camcorder with a Multi/ LANC terminal, adding a pan-handle based camera control to your setup. It fits most tripods with handle diameter within 0.4"-1.4". It enables you to control your camera/ camcorder by using a cable connected to the multi/ LANC port rather than using buttons on the camera/ camcorder. This can make operation much more convenient and flexible for you, enables you to focus on the shot you are trying to capture rather than the mechanics of the equipment. Designed with a detachable multi-function controller, you can detach the controller from the tripod to prevent camera shaking when shooting still images. Hold the tripod and press the PUSH RELEASE button to pull the controller out. Slowly slide the controller onto the pan bar for easy attaching. And the controller functions with power on/ off, video/ still image recording, zooming, slow zooming, locking function and displaying grid line. Note: Not all cameras/ camcorder supports shooting, bulb shooting, continuous shooting or grid line. Refer to the operating instructions of your camera/ camcorder for details. Silicone pads designed inside the handle clip are for closer clamping and protect tripod handle from scratching. Constructed from premium aluminum alloy, the pan bar is sturdy and provides years of reliable use. Rotate direction control and lock knob to position the pan bar at any 10-degree interval while avoiding slippage or accidental loosening. Package Contains: Camera Remote Controller x1 Connecting Cable for Multi Terminal x1 Connecting Cable for LANC Terminal x1 Storage Pouch x1 Lanyard x1 Instruction Manual x1