Jandei - Switch with PIR Motion Sensor on PCB for Led Strip and Electronics, Operation at 12V and 24V DC 96W, Reduced Size for Mounting on Aluminum Profile

• ✅The PCB motion switch allows you to turn on your LED strips and other 12Vdc or 24Vdc equipment. It works when detecting movement (1.5 meters). Power-on time is 70 seconds
• 🛠The ignition is done when the built-in PIR detector detects movement. Turn on your LED strip light with complete ease. Without having to touch any switch
• 🕣The long useful life of the switch is due to being free of mechanical elements.
• ⚡Switch for single-color strips, connects to the strip by welding and supports up to a power of 96w, with IP20 protection, it is only suitable for indoor installations
• 📏Dimensions of the PCB without cables: 43 mm long x 10 mm wide. PIR detector: 14 mm diam x 11 mm high. Weight:8 grams

The ignition time is 70 seconds. Ignition is done by motion detection of the built-in PIR detector. Turn on the light of your LED strip easily. Without having to touch a switch. The long service life of the switch is based on being free from mechanical elements. This switch and touch controller is intended for installation in profiles and other elements as it is an electronic circuit board. The PIR detector is wired to the board with 3cm cable.