Jablite 25mm Multi Purpose Insulation Boards Floor Wall Roof & Underfloor Heating (18)

• Jablite HP (High Performance) is a closed cell expanded polystyrene (EPS) multi-use insulation board suitable for a wide range of insulation applications. Jablite HP is grey in colour due to the carbon additive which acts within the boards to disperse and reflect heat radiation. This gives the boards an improvement in thermal performance compared to white EPS.
• Jablite HP insulation has been tested and approved by the British Board of Agrément (BBA). Certificate number 87/1796 Product Sheet 4.
• Jablite HP Insulation can be used in temperatures up to 80°C. It is therefore suitable for use with underfloor heating systems. Jablite HP does not degrade when placed in high moisture areas and is resistant to the effects of freeze thaw. Jablite HP will remain an effective insulation for the life of the building.
• Jablite HP conforms to the required properties as defined in BS EN 13163:2012 – Thermal insulation products for buildings – Factory made expanded polystyrene (EPS) products – Specification. This includes compliance with BS 3837 Part 1
• Contains 18 boards, each 45 x 120 x 2.5cm

Specifications Jabite Code - EPS70HP Thermal Conductivity (Lambda) - 0.032 (W/mK) Weight - Approx 226g per sheet Design load at 1% nominal compression (kPa) - 20 Design load at 10% nominal compression (kPa) - 70 Fire - Euroclass F, non fire retardant material. Usually recommended to be concealed within construction, beneath solid floor coverings or behind plasterboard linings. Easy to cut to size using a sharp knife Example Applications/ Calculations 9 inch solid brick (225mm wall), no insulation, U-value is 1.98, thermal resistance = 0.506 9 inch solid brick (225mm wall), with 25mm Jablite, U-value is 1.29, thermal resistance = 1.287 (2.5X better insulation) 9 inch solid brick (225mm wall), with 2 layers 25mm (50mm) Jablite, U-value is 0.48, thermal resistance = 2.068 (4.1X better insulation) Metal garage door, apply 25mm Jablite to the inner side = 600X less heat loss. Makes an amazing difference to attached or integral garage Other Application Examples New and existing rendered or unrendered masonry. Timber backed walls, floors and roofs. Cavity wall construction, On layered external walls, In places likely to develop thermal bridges, On beams and under slabs In balconies and loggias, Under roofs and between rafters ‘Due to the nature of this product, it is possible that it could suffer slight damage going through the postage system, for example to the corners, however, it will still be fully usable as an insulation product and this will not affect its overall performance’