ITAP-FIT -IT635B012015- Brass Connector T-Piece for Copper Pipe Ø 15 mm x 1/2 IG - DVGW

• ITAP-FIT Brass Connector for Copper Pipe / Design: T-piece with Pipe Connection Diameter 15 mm x 1/2 Inch Internal Thread (Centre)
• Material: untreated brass with anti-inclination (DZR) // Thread in accordance with ISO 7/1 (complies with DIN EN 10226-1).
• Nominal pressure: 20 bar at 25 °C and 10 bar at 90 °C. Operating temperature: -20 °C to max. +130 °C
• Approvals: DVGW – approved for drinking water and heating systems. These connectors can be used for copper pipes (RAL, semi-hard, pulled) as drinking water pipes, in heating construction, air pressure systems and industry.
• Note: After assembly of the connectors and piping, always a pressure sample (DIN4279). In the event of failure to perform and/or loss of written evidence, no compensation will be paid by the manufacturer.

ITAP-FIT brass connector for copper pipe, design: T-piece with pipe connection x internal thread (centre), material: untreated brass with zinc protection (DZR), nominal pressure: 20 bar at 25 °C and 10 bar at 90 °C, operating temperature: -20 °C to max. +130 °C thread in accordance with ISO 7/1 (complies with DIN EN 10226-1) approvals: DVGW - approved for drinking water and heating systems. These connectors can be used for copper pipes (RAL, semi-hard, drawn) as drinking water pipes, in heating construction, air pressure systems and industry. Note: After fitting the connectors and pipe laying a pressure sample (DIN4279) must always be performed. In the event of non-execution and/or loss of written evidence, no damages will be taken over by the manufacturer.