Inkbird Digital Temperature Controller Brewing Thermostat for Heating Cooling Pre-wired with 12 Inches Stainless Long NTC Sensor

• 【Wide Range】 Food grade stainless steel probe temperature range is -50~120 °C / -58~248 ° F with high accuracy: ± 1 ° C (-50 ~ 70 ° C) / ± 1 ° F (-50 to 160 ° F) . Dual display window are displayed in a position to the measured temperature and set temperature simultaneously.
• 【Plug-and-play design】Easy to use, just plug into your heating/cooling devices and set the target temperature, then it works, NO WIRING.
• 【2 Sockets Outputs】With 2 sockets output, one for heating and another one for cooling. Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.Also, compressor delay protection for compressor control.
• 【Temperature Alarms】The Inkbird temperature controller has high and low temperature alarms,sensor fault alarm,over temperature alarm.
• 【Warm Tips】Waterproof IP68 NTC probe but the controller isn't Waterproof, can submerge sensor probe into fish tank, but please don't submerge controller in water. :)

<b>Bullet Point: </b> <br>Ideal for beer wine making, fermetation, reptile heat mat, aquarium light lamps, bulbs, fans ect. <br> Easy to use,plug your heater/fans in the sockets, set the target temperatures, then it goes. <br> NTC Temperature Sensor 12in Stainless Steel Probe with 6.5ft DC cord <br> The Inkbird temperature probe can be submersed into your beer direclty during fermentation. <br> No need to worry about inserting a smaller probe into a separate thermowell temperature probe. <br>The Inkbird 30cm long sensor is compatible with INKBIRD's following controllers: ITC-308S,ITC-306T,ITC-310T. <br> Measuring temperature range: -50℃~120℃ <br> Probe Material:Stainless steel <br> Probe Dimensions: 6mm x 300mm (0.24in x 12in) <br> Cord Length (excluding probe): 2m (6.5ft) <br> <br> <b>Specification: </b> <br> Temperature control range -50 ~ 99 ° C / -58 ~ 210 ° F <br> Temperature resolution 0.1 ° C / 0.1 ° F <br> Temperature accuracy of ± 1 ° C (-50 ~ 70 ° C) / ± 1 ° F (-50 to 160 ° F) <br> Temp Control mode on / off control, heating and cooling <br> Input 100 ~ 240VAC, 50Hz / 60Hz <br> Temperature Control output max. 10A, 100V ~ 240V AC <br> Alarm high and low temperature alarm <br> Relay contact capacity cooling (10A, 100-240VAC) <br> Heating (10A, 100-240VAC) <br> Input power cable length 1.5 m (5 ft) <br> Output Power cable length 30 cm (1 ft) <br> Dimension body: 140x68x33mm (5.5x2.7x1.3inch) <br> Socket: 85x42x24mm (3.3x1.7x1inch) <br> Ambient temperature -30 ~ 75 ° C / -22 ~ 167 ° F <br> Storage temperature -20 ~ 60 ° C / -4 ~ 140 ° F <br> Humidity 20 ~ 85% <br> <br> <b>The package includes: </b> <br> 1x Inkbird ITC-308S plug temperature controller thermostat <br> 1x 12" 30cm Stainless long sensor probe <br> 1x User manual in English