Industrial USB to RS485 Converter Adapter with Original CH343G and SP485EEN, Built-in Lightningproof Tube, Resettable Fuse, ESD and TVS Protection Circuits, up to 1.2km RS485 Transmission Distance

• 【USB TO RS485 Bidirectional Converter】lndustrial grade converter support USB to RS485 bidirectional conversion, onboard original CH343G and SP485EEN chips, fast communication, stable and reliable, better compatibility
• 【Transmission Distance up to 1.2km】The USB signal can be converted into a balanced differential RS485 signal and the transmission rate is stable. The reliable speed is 300bps ~ 3Mbps, the transmission distance is about 1.2km for RS485, and about 5m for USB
• 【Multi-Protection Circuits】Onboard lightningproof tube, resettable fuse, ESD and TVS protection circuits, etc.
• 【Multi System Support】Supports Mac, Linux, Android, WinCE, Windows 11/10/8.1/8/7/XP, etc.
• 【Working Status Indicators】Onboard 3 LEDs for indicating the power and transceiver status

Overview Industrial USB TO RS485 Bidirectional Converter, Onboard original CH343G, Multi-Protection Circuits Features At A Glance 1. Support USB to RS485 bidirectional conversion. 2. Onboard original CH343G chip, CH343G is a USB bus adapter chip, which can convert USB to a high-speed asynchronous serial port, supports automatic identification and dynamic self-adaptation of communication baud rate of 115200bps and below, and provides commonly-used MODEM contact signals to expand asynchronous serial ports for computers. It can upgrade a common serial device or MCU directly to a USB bus. 3. Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightningproof & anti-electrostatic. 4. Onboard resettable fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage proof, improves shock resistance. 5. 3 LEDs for indicating the power and transceiver status. 6. Supports Mac, Linux, Android, WinCE, Win11/10/8.1/8/7/XP, etc. 6. Fast communication, stable and reliable, better compatibility. Specifications 1. USB 1) Operating voltage: 5V 2) Connector: USB-A 3) Protection: 200mA self-recovery fuse, ESD protection 4) Transmission distance: about 5m 2. RS485 1) Connector: screw terminal 2) Pins: A+, B-, GND 3) Direction control: hardware automatic control 4) Protection: 600W lightningproof and surge-suppress, 15KV ESD 5) protection (onboard 120R balancing resistor) 5) Transmission distance: about 1.2km(low rate) 6) Transmission mode: point-to-multipoints (up to 32 nodes, it is recommended to use repeaters for 16 nodes or more) Package Content 1. USB TO RS485 (B) x1 2. USB-A male to female cable x1 3. Screwdriver x1 Development Resources https://www.waveshare.com/wiki/USB_TO_RS485_(B)?amazon