iluminize Zigbee 3.0 Remote Control Mini with Touchlink for RGB/RGB+W/RGBW/RGB+CCT LEDs, 4 Zones (for RGB/RGB+W/RGBW/RGB+CCT LEDs)

• Compatible: integrate the remote control into your Zigbee 3.0 network. It works with the well-known Zigbee 3.0 systems and voice controls. Important: the device is delivered without a coordinator. The remote control is not a Friends of Hue switch and is not displayed in your app on Hue and all other Zigbee centres - it must be connected to your Zigbee 3.0 devices via touch link.
• Smart: handy Zigbee 3.0 remote control with touchlink for controlling light installations with RGB, RGB+W, RGBW and RGB+CCT LEDs such as LED strips, LED spots, LED panels and lamps in up to 4 independent zones. Control the brightness and adjustment of the colour can be done for individual zones or synchronously across all zones.
• High quality: plastic case with non-slip surface and sensitive touch, just touch the brightness wheel and adjust the brightness.
• Continuous brightness: the brightness is freely selectable between 0.1% and 100%. The setting of the colours works via a touch dial Two additional control buttons are available for dimming white and setting the colour temperature. Up to 3 light scenarios per zone can be stored permanently.
• SUPPORT: Do you need technical support or are planning a light installation? Please contact us and take advantage of our consultation offer by email or phone (0049 2835 782 37 - 00, Mon-Fri. 9 am-5 pm). You can also send us sketches or floor plans of your planning.

Zigbee 3.0 Hand Remote Control with Touchlink Handy Zigbee 3.0 remote control for controlling RGB, RGB+W/RGBW/RGB+CCT LEDs such as LED strips, LED recessed spotlights (LED spots), LED panels and lamps. A quick guide for integrating via Lightlink and Touchlink is included with the product. The detailed instruction manual can be found at: https://www.iluminize.com/de/shop/led-bedienungsanleitungen/anleitungen-zigbee. The control can be done separately for individual zones. The brightness can be selected between 1% and 100%. The colour setting works via a touch dial Two additional control buttons are available for dimming white and setting the colour temperature. 10 colour changing programs, are pre-installed. Up to 3 light scenes per zone can be stored permanently. The range is approx. 30m Includes a wall mount including screws. Powered by 3 AAA batteries (not included). Notes: Zigbee Lightlink & Touchlink (3.0) Advice required? Are you planning an installation and need larger quantities in different lengths or with longer cables? Please contact us and take advantage of our non-binding advice by email or phone (+49 2835 782 37 - 00). You can also send us sketches or floor plans of your planning.