Hyuduo Mini FSESC 4.12 50A ESC for Electric Skateboards VESC-Compatible, High-Current Brushless ESC with Over-Temperature & Current Limit Protection

• [Compact and light] The small and exquisite design of this ESC facilitates installation in various products, guaranteeing a compact and light solution for board conversions with electric wheels.
• [Reliable performance] with temperature protection and current limits protection, this ESC offers reliable and stable performance during operation, guaranteeing a smooth and safe driving experience.
• [Very modifiable] on the basis of the Open-Source Vesc project, this ESC is compatible with the VESC software and offers a high modification for personalized electric configurations.
• [Smooth and reliable operation] Get a gentle start and a powerful electric brake with this ESC, allowing precise control and stable driving experience on your electric roller board.
• [Easy to install and use] Designed for easy installation and operation, this ESC is delivered with the components and features necessary for a hassle - configuration on your electric roller board.

1. Small and exquisite, widely used, can be installed in various products, smaller and lighter, suitable for scooters, robots and other products. 2. Flipsky ESC is based on the Open Source Vesc project and is compatible with the VESC software. 3. Flipsky ESC is a highly modifiable electronic speed controller designed for the conversion of boards with electric wheels. 4. Flipsky ESC allows you to use a motor without a sensor to get a smooth start -up, while the traditional ESC RC may not be able to start. It also provides a powerful, reliable and progressive electric brake. 5. The maximum DC current can 50 A, with temperature protection and protection against current limits, taking charge of several control modes. Specification: Condition: Nine Article type: electronic speed control Color: as shown images Material: PCB card + Thermal dissipator in aviation aluminum alloy + Thermal silica gel + MOS MOS tube Model: V4. 12 Standard ESC configuration Material: V4.12 EPRM: 60000 Firmware: V3.40 (keep the latest version of the firmware) PCB: 4 layers PCB size: approx. 40 x 60 mm / 1.57 x 2.36 inches Current: continuous 50 a / crest 240 A, it depends on the installation and the room temperature around the device Voltage: 8-60 V (can be used for 3s to 12s lipo, the peak voltage should not exceed 60 V!) Recommended battery of 10 s (not included) Beak: 5 V to 1.5 a Type of beak: care of the internal pilot Time: software calibration Engine control interface: PPM Signal (Servo RC), analog, UART, I2C USB or CAN bus. Cutting voltage: programmable Frequency: PWM input Regulator: No Weight: approx. 80 g / 0.18 lb FSESC4.12 Size: approx. 110x40x20mm / 4.3 x 1.6 x 0.8 inches Programming card: no Reverse : Engine wire: 12awg Food cord: 12AWG List of packages: 1 x electronic speed control 1 x USB cable 1 x Vesc sensor line 1 x manual Noticed: By default, the LED button was inserted into the factory switch. Please do not turn on the switch without the LED button being connected.