Hydor Universal Pump SELTZ D AC 12000 l/h, Fresh and Marine Aquariums, Circulation Pump, with Feed Mode, Electronic Controller

• Universal pump with electronic control for aquariums. Also suitable as a return or circulation pump and for use in sump. Works both in and out of the water. Reduced energy consumption.
• Feed Mode: pauses the pump for 5 minutes and allows you to feed the fish or carry out maintenance. Sensor switches off the pump preventing damages in the absence of water flow.
• Rotating front chamber to adapt to different needs. Prefilter included. Maximum silence and stability thanks to the anti-vibration silicone insert and the rubber feet.
• Regularly clean the rotor and its seat with a soft brush, the grids with running water. Do not use solvents or detergents. In case of loss of performance or noise, restart the pump.
• Power 130 W. Maximum flow rate 12000 l/h. Maximum head 480 cm. Overall dimensions: 21 x 8,9 x h 11,9 cm. Adjustable flow rate.

Product Description The Seltz D AC universal pump by Hydor is versatile and ideal for freshwater and marine aquariums, both for use in sump and as a return or circulation pump. The electronic controller allows you to adjust the flow rate in six different intensities. In addition, a dedicated button activates the Feed Mode, which pauses the pump for 5 minutes and allows the fish to be fed. There is also a Power LED and a Service LED that indicates malfunctions. The pump works both in and out of the water, maintaining the same silence and respecting the environment. The anterior chamber can b rotated, adapting to the different needs of use. If the water flow is less than optimal for operation, a sensor inside the motor shuts down the pump to prevent damage. In addition, a special internal anti-vibration mechanism and the rubber feet guarantee stability even in adverse conditions. Seltz D AC is available in various models with different flow rates, power and max head. Cleaning tips: remove dirt and limescale from the rotor and its seat with a soft brush, do not use detergents or solvents. Clean the grids with running water. In the event of a drop in performance or noise, restart the pump to eliminate the air trapped inside. Directions Read the manual and instructions for use carefully before using the product.