High Voltage Transformer, Fydun 80kV High Voltage Pulse Generator Inverter Super Arc Pulse Ignition Module 6-12V High Voltage Generator High Voltage Pulse Generator

• Wide range of uses: The peripheral circuit of the high-voltage transformer is simple (just connect the switch, install the battery), and the discharge intensity is large. It produces high temperature and high frequency arcs that easily ignite combustibles. It can be used as a high-voltage source for high school science experiments, electronic instruments, negative ion generators and small sciences.
• Safety: No more than 20 seconds per boot time. Due to the high output power, it must be driven by a rechargeable battery or battery. Improper voltage and long hours of can easily damage high voltage modules. Be careful when testing and using! Keep the ignition distance within 1cm.
• High output efficiency: It adopts high-voltage power supply in scientific small batch production. The module is made of for coil principle, which outputs high-voltage pulse current, small volume and high efficiency. Input voltage 6V-12V input current 0.5A-1A output voltage about 500KV (please pay attention to safety when using) Output current 0.5A-1A.
• Note: The small-capacity series lithium battery is 7.2 V. When the arc is discharged, the voltage will drop to about 4V. The smaller the capacity, the lower the voltage. It is recommended to use a lithium battery of 2000MA or higher, and it is best to use a battery of 4000MA or more.
• Service: We are responsible for the product and believe in the quality of the product. Professional features and high reliability will bring you a different experience and ensure every customer's satisfaction. If you have any questions about our products, we will answer them at any time.

Specifications: Size: 55*24*22mm/2.17*0.94*0.87inch Input voltage: 6V-12V Input Current: 0.5A-2A(depending on the input voltage) Input line length: about 10cm/3.94inch High Voltage type: DC type Output voltage: about 80KV (please pay attention to safety when used) Output current: 0.5A Output line length: about 10cm/3.94inch High voltage poles ignition distance: ≤1.5cm(1.5cm is maximum distance, 1cm is better) Note: 1.Input the power of 6-12v, output two levels of terminal can produce 1.5cm length purple high temperature arc, instant ignition paper, single high voltage line can also discharge of any metal body, working without a crack sound. 2.On the input power: 3.7-v lithium battery can be used in series, such as 18650 battery, idle cell phone battery (to remove the board, recommended capacity 2000mAh) , (12V battery works best) Module Usage Precautions: 1. Avoid power on when No load. You must adjust the appropriate distance for high-voltage terminal before power on, high-voltage line arc distance is proportional to the battery voltage and capacity. 2. The test arc distance from the short to long experimental, It is prohibited exceed the maximum arcing distance(<1.5cm,1cm is OK). Otherwise, energy can not be released due to high voltage, easily damaged modules. 3. The module power, the internal is not easy for heat dissipation, so it can not work for a long time. 4.To determine whether the battery capacity can drive the maximum output power is the way to measure the battery voltage when in the arc state. Package Included: 1 x High Voltage Pulse Generator