High Flow Siphon Pump Gasoline Oil Water Fuel Diesel Transfer Siphon Pump Siphon Fuel Transfer Pump Siphon Hand Fuel Pump Portable Manual Car Liquid Gas Transfer PumpSiphon Hose for Manual Pumping 8mm

• GREAT MANUAL HAND SIPHON PUMP - This syphon pumps is super easy to use, you just put the fuel transfer hoses in where you want them and pump the hand pump and it draws out all the fluid. This gasoline siphon pump made it effortless to empty out your gas tanks. So worth the purchase and it'll pay for itself in the gas savings alone in one season!
• QUICK FUEL TRANSFER - The siphon pumps the oil from one container to another easily, and is meant to go down into a fuel tank without an anti-siphon filter. The gas syphon is great for stealing a bit of gas for your lawn mower when you need it, you just push the tube down, start pumping the bulb and fuel starts to flow, the same as with the old way of sucking on the tube but this is much safer.
• HEAVY DUTY HOSE - The gasoline siphon hose tube is able to get into small spaces. Siphon tube is nice and thick so no easy break/crushing. Siphon hand pump is made of a thick silicone outer frame. Make sure you put the long hose into the liquid you want to pump out and the short tube on the end of the rubber ball where you want to send the liquid.
• NO MORE MESS WHEN TRANSFERING LIQUIDS ! - This siphon gas pump transfer allows you to keep things nice and clean with no spilling.
• The gasoline siphon is easy to use and assembly is simply putting the bulb on the hose. The Siphon Pump works great to extract a little liquid from something, be it gas, coolant, water. Do not mix liquids.

There is an arrow mark on the non-slip rubber fuel pump to make it easier to distinguish between inlet and outlet. There is a bottle opener in the product. The interface has a reinforcing ring for a good seal and prevents oil from leaking. Specifications: Hand pump: Material: rubber and aluminum alloy Hose length: 90cm Pump length: 13cm Hand width: 4.3cm Hose diameter: 8mm Thickness: 2mm Opening pressure: 0.2bar Working pressure range: 0.2-0.6 bar Working temperature range: -30 ° C- 130 ° C Bottle opener: Material: aluminum alloy How to use: 1. Follow the arrow to separate the inlet and outlet pipes. Put down the oil line. 2. Insert the oil inlet tube into the fuel tank and touch the bottom of the fuel tank. 3. The oil line is inserted into the prepared oil drum. 4. Squeeze the rubber ball 3-5 times 5. Then the liquid flows out automatically Note: 1. This hand pump is suitable for the fuel tank that does not contain an anti-theft oil filter. 2. The height of the oil inlet is higher than the height of the oil outlet. 3. Please clean in good time after use to avoid clogging the oil line. Delivery includes 1 x pump