Hempel Sealer 599-750ml

• Two-component epoxy-polyamide varnish
• Excellent flow at application
• Good penetration ability

Product description Hempel Sealer 599 is a two-component epoxy-polyamide varnish with low viscosity and good penetration ability. For saturation of glass fibre laminate, when gel coat has been removed (repair of osmosis damage). For priming of ferro-cement boats and boats of wood that can absorb the sealer. Minimum Application Temperature : 10°c Glass fibre: All loose/defect gel coat must be removed and any absorbed moisture must have evaporated before applying the product. Ferro-cement: Any loose surface layer (e.g. laitance) must be removed by sanding or abrasive sweeping. The moisture content of the concrete must be below 3%. Wood: The wood must be completely dry, moisture content below 16%, and should not be primed with any ordinary priming oils or commercial antimould fluids. The wood must be capable of absorbing the sealer completely. APPLICATION CONDITIONS: The surface must be completely clean and dry at the time of application and its temperature must be above the dew point to avoid condensation. Use only where application and curing can proceed at temperatures above: 10°C/50°F. The temperature of the surface and that of the sealer itself must also be above this limit. Brush is recommended to ensure the sealer being worked into the substrate. Absorbing surfaces must be treated several times until saturation. In any case a glossy surface must not appear and such a surplus of the product must be removed by sanding before painting takes place. In confined spaces provide adequate ventilation during application and drying. Legal Disclaimer Unfortunately we are unable to ship this item to, Isle of Man, Channel Islands or any Scottish Islands. Orders placed for these addresses will be cancelled and refunded due to carrier restrictions.