Heat Shrink end Cap 35,0 -> 16,0mm ; Length: 83mm ; Shrink endcap Black

• PERFECT SEALING AND INSULATION: The additional adhesive on the inside, which liquefies when shrinking, ensures a waterproof seal and perfect seal. The shrink ratio of the end cap is 3:1.
• Universal use: the heat shrink tube end caps are not only suitable for insulating cable ends. They prevent fraying of the ends with ropes/wire ropes and serve as edge protection for pipes or prevent dirt from entering.
• Product features: the shrink end caps made of cross-linked polyolefin have an operating temperature of -55°C to +110°C and are UV-resistant.
• Easy to use: 1. Insert the end cap over the cable, pipe or rope, 2. Use a heat dryer at approx. 120°C while turning evenly from all sides, 3. Check for correct fit and adhesion -> done.
• Dimensions: the end cap is 89 mm long, has an inner diameter of 35 mm and can be shrunk up to 18 mm. The wall thickness of the black shrink cap is 3.3 mm when shrunk.

Length: 0.089 m. Design: loose. Shrink rate: 3:1. Colour: black. Inner diameter before shrinking: 35 mm. Inner diameter after shrinkage: 15 mm. Adhesive: with glue. Material: cross-linked polyolefin Wall thickness after shrinkage: 3.3 mm. Flame retardant: yes. Operating temperature: -55°C to +110°C. Minimum shrinkage temperature: +120°C.