Hager WMSS82USB 'Sollysta' Switch Socket Outlet 13 Amp with 2 x USB Charging Points 2.4A

• Two charging ports capable of delivering a total maximum charging current of 2.4A. This can be delivered to either port, or divided between the two ports as required, and controlled by the devices being charged. The ports are marked 5V ===2.4A
• Built in intelligent connection, enabling the socket to identify itself as the dedicated primary charger for the connected device. This allows for maximum charging capacity and improved charging speeds, as the device allows the socket to bypass its trickle/safety charging mode. (details for Intelligent connection continued below).
• Over load protection on output: 2.8+/-0.3A.. - Fuse rating: 3.15A/240VAC . In standby mode the power consumption is <150mW and the average current (rms) < 1 milli amp. The USB charger is suitable for carging most portable electronic type A plug.
• Protected against over-current and short circuit conditions on the output by a non-replaceable fuse. (i.e. the product will fail safe). Can be installed in 35mm back boxes. Where 25mm back boxes are fitted, 10mm spacer WMUSBS should be used (sold separately)
• Tested by Nemko UK to all relevant clauses of BS 1363-2:2016 + Annex and deemed to comply.. CE approved

Intelligent Connection The WMSS82USB dual USB adapter communicates with the automatic host charger identification circuitry for USB dedicated chargers. This allows the charger to to identify itself as a dedicated USB charger to USB devices like Apple charger for Apple devices, Samsung to Samsung devices and BC1.2 charger to HTC, Sony, LG, Blackberry, Lenovo etc. Features 4.5V~5.5V Single Supply Operation Automatic USB charger identification circuit. Dimensions: 146mm wide x 86mm tall x 7mm deep. 30mm rear projection High quality product from trusted manufacturer meeting all relevant safety standards, not to be confused with similar products"