Guard CR Chlorinated Rubber Road Line Marking Paint - 5 Litres Multiple Colours (White)

• Perfect for Line Marking on Roads, Drains, Car Parks
• Resistant to Chlorine & Other Acidic Substances
• Fast Drying
• Direct to Metal/Surface
• Apply by Brush, Roller or Spray

A single component conventional coating for various uses and application onto a range of substrates including both concrete floors, steelwork, line marking purposes & swimming pools/ponds. Recommended Uses Easy application product for internal or external use as a full coating onto suitably prepared steel and limited other surfaces including masonry and brickwork. Is ideal in circumstances where easy recoating properties are required. Can be used on suitably prepared floors as either a full coat or for line marking purposes, for light to medium traffic, giving good abrasion resistance and a degree of chemical resistance. Product can also be used for swimming pools due to having good properties to resist chlorine and other acidic substances. Please speak to our technical team for specific instructions when used for this purpose. Technical Pack Size: 5 Litre Theoretical Spread Rate: 7m² per litre based on 50μm dft Volume Solids (approx): 55% Dry Film Thickness (DFT): 30-50μm Wet Film Thickness (WFT): 55-90μm Flash Point: 23-60°C VOC Content: 580gms/litre Temperature Resistant: 40°C Drying Times Touch Dry: 60 Minutes Hard Dry: 24 Hours Full Cure: 7-14 Days Recoatable: 24 Hours Drying times are based on temperatures of 20°C, lower temperatures will increase drying times. Please speak with our technical team before elevating temperatures or attempting to force cure any of our products unless already stated. Shop conditions such as having good airflow will optimise curing. Compatibility Limited. No issues overcoating with itself, though surface must be cleaned and suitably prepared if this is a more than a few days after the original coating. Colours in drop down: Yellow = RAL 1018, Light Blue = RAL 5024, Blue = RAL 5010, Light Green = RAL 6017, Green = RAL 6001, Light Grey = 7040, Grey = RAL 7000, Dark Grey = RAL 7016