Genuine On/Off Switch with LED Power Indicator for Razor Crazy Cart (V1+) & Crazy Cart DLX (V1+) — Part #W25143494101

• Built-In LED Power Indicator — A Safety Feature, Not Just a Visual — The LED indicator that illuminates when the switch is on serves a practical purpose beyond aesthetics: it makes it immediately obvious whether the cart is live or off. A cart left switched on in storage will drain the battery to a damaging depth of discharge. The LED indicator eliminates this risk by making the on-state impossible to miss — a feature absent from generic replacement switches
• Rated for the Crazy Cart's Full Electrical Load — The on/off switch carries the full battery current every time the cart is powered on. The genuine switch is rated for the Crazy Cart's 12V system and the peak current draw of the 250W motor, ensuring the contacts can handle repeated switching cycles without arcing, burning, or welding closed. Generic switches rated for lower currents will fail prematurely under this load.
• Sealed Against Moisture and Debris — The Crazy Cart is used on hard outdoor surfaces where water, grit, and dust are unavoidable. The genuine switch housing is sealed to prevent moisture and debris ingress into the contact mechanism — the most common cause of switch failure in outdoor ride-on applications. Generic alternatives frequently use unsealed housings that corrode rapidly in outdoor conditions
• Pre-Attached Wiring Harness — Direct Plug-and-Play Installation — The wiring harness connector is pre-attached and matched exactly to the Crazy Cart's wiring loom. No soldering, crimping, or wiring modification is required — the switch connects directly to the existing harness in minutes.
• Correct Panel Cutout Dimensions — No Modification Required — As a genuine manufacturer part, the switch body dimensions and mounting clip configuration match the panel cutout on the Crazy Cart chassis exactly. No drilling, filing, or adaptor is required for a clean, secure fit

Genuine On/Off Switch with LED Power Indicator for Razor Crazy Cart (V1+) & Crazy Cart DLX (V1+) — Part #W25143494101 Product Description The on/off switch on the Crazy Cart is more than a simple power toggle. It is the master control that connects the battery to the entire drivetrain — and it does so thousands of times over the life of the cart, under the vibration, lateral forces, and repeated impacts that are an unavoidable part of drifting. When the switch fails, the cart either refuses to power on at all, powers on intermittently, or — in the case of a switch that has failed in the closed position — cannot be turned off. This is the genuine factory replacement on/off switch for the Razor Crazy Cart (Version 1 and above) and Crazy Cart DLX (Version 1 and above). It features the built-in LED power indicator that illuminates when the cart is switched on — a practical safety feature that confirms the cart is live and prevents the battery from being left on unintentionally when the cart is stored. The switch is supplied with the wiring harness connector pre-attached for a direct, plug-and-play installation. Key Features Built-In LED Power Indicator — A Safety Feature, Not Just a Visual — The LED indicator that illuminates when the switch is on serves a practical purpose beyond aesthetics: it makes it immediately obvious whether the cart is live or off. A cart left switched on in storage will drain the battery to a damaging depth of discharge. The LED indicator eliminates this risk by making the on-state impossible to miss — a feature absent from generic replacement switches. Rated for the Crazy Cart's Full Electrical Load — The on/off switch carries the full battery current every time the cart is powered on. The genuine switch is rated for the Crazy Cart's 12V system and the peak current draw of the 250W motor, ensuring the contacts can handle repeated switching cycles without arcing, burning, or welding closed. Generic switches rated for lower currents will fail prematurely under this load. Sealed Against Moisture and Debris — The Crazy Cart is used on hard outdoor surfaces where water, grit, and dust are unavoidable. The genuine switch housing is sealed to prevent moisture and debris ingress into the contact mechanism — the most common cause of switch failure in outdoor ride-on applications. Generic alternatives frequently use unsealed housings that corrode rapidly in outdoor conditions. Pre-Attached Wiring Harness — Direct Plug-and-Play Installation — The wiring harness connector is pre-attached and matched exactly to the Crazy Cart's wiring loom. No soldering, crimping, or wiring modification is required — the switch connects directly to the existing harness in minutes. Correct Panel Cutout Dimensions — No Modification Required — As a genuine manufacturer part, the switch body dimensions and mounting clip configuration match the panel cutout on the Crazy Cart chassis exactly. No drilling, filing, or adaptor is required for a clean, secure fit. Compatible Models Razor Crazy Cart Version 1 and above Razor Crazy Cart DLX Version 1 and above Not compatible with the Crazy Cart XL: The Crazy Cart XL uses a different on/off switch with a different connector configuration and panel mounting dimensions.Not compatible with the Crazy Cart Shift range: The Crazy Cart Shift, Shift 2.0, and Shift Lightshow all use different switch assemblies specific to their respective chassis designs.How to identify your version: Locate the barcode sticker on your battery cover or the bottom of the frame. The 7th and 8th digits of the product ID code indicate your version number (e.g., "01" = Version 1, "05" = Version 5)