Garage Door Remote Control 433.92MHz 2 Pack for EcoStar RSC2-433 RSE2-433 Garage Door Opener for Hormann EcoStar Liftronic 500/700/800 for Portronic D2500/D5000

• Warm Tips This garage door remote control is more of a replacement than an original accessory. We recommend that you refer to the device compatibility list below before making the purchase
• Compatibility List - With a frequency of 433.92MHz, our garage door remote only works for Hormann EcoStar RSC2-433, RSZ1-433, RSE2-433. Compatible with Hormann Liftronic 500/700/800 and Portronic D2500/D5000/S4000 garage door motors
• Incompatible models: NOT compatible with Ecostar BS Series (RSC4-433-BS, RSZ1-433-BS) and Liftronic 700 Series 2, Liftronic 800 Series 2.
• 2 Channels:2 buttons correspond to 2 independent channels, and each button can individually control a door opener
• With Battery This garage door remote comes with a CR2032 3V lithium battery, no need to buy new batteries

Parameters: Frequency: 433.92MHz Number of buttons: 2 Size: 6.5 x 3 x 1.5cm Battery Type: CR2032 Lithium Battery Only with the following garage door opener models (433MHz). Compatible with: Ecostar RSC2-433 RSE2-433 RSZ1-433 Liftronic 500/700/800 Portronic D2500/D5000/S4000 Incompatible models: RSC4-433-BS. RSZ1-433-BS. Liftronic 700-2 Liftronic 800-2 Attention: 1. Compatible with the Hormann EcoStar 433.92 MHz manual transmitter. 2. Does not fit Ecostar BS Series and Liftronic Series II. 3. High quality replacement, easy to program and operate. Comment scheduler? Before programming. Please open the receiver from the garage door. Step: 1. Press the programming button. (Some receivers need to hold down the programming button.) 2. The receiver LED indicates the start of programming mode. 3. Press a button on the new remote control for one second and release. 4. The receiver LED turns on or off to indicate successful programming. 5. Wait a few seconds to exit programming mode. Programming is complete. Why does the indicator light not turn on or weak when the buttons on the remote control are pressed? This may be due to an empty or weak battery. If the indicator light does not turn on even after replacing the battery, please check whether the button or remote control is damaged.