Funnytek Plasterboard Tape, 70m x 48mm Drywall Tape Plasterboard Paper Joint Tape Masking Tape Edge Protection Corner Rail for Wall Corners, Repair Wall Cracks

• 【Foldable And Bendable】Drywall Tape is made of a soft material that can be folded, which not only allows the tape to fit perfectly on flat surfaces, but can also be used to protect and adhere to the outer and inner corners of walls.
• 【Airflow Hole】Plasterboard Tape has evenly spaced ventilation holes that maintain good breathability and water permeability when in use, allowing air to effectively escape for better adhesion to the wall surface in order to prevent various problems such as cracking and blistering.
• 【Easy To Use】Angle profile repair tape can be used in just a few steps: first, clean up the work surface, shovel out the convex surface and fill in the concave surface; then cut the drywall repair tape to the right length, stick it directly on the gap, smooth it with putty, dry it naturally and then sand it flat; lastly, brush a layer of putty and brush paint or lacquer directly on top of it after the putty dries.
• 【Quality Materials】Dry construction wall joint tape is mainly made of high quality kraft paper material, with good softness, ductility, high tensile strength and good support and fit that can effectively fit and repair gaps, wall corners and recesses. With a thickness of only 1mm/0.04in, the ultra-thin thickness combined with the rough surface allows it to adhere well to plaster or putty materials, making it easy to handle and use, saving materials, time and effort.
• 【Wide Application】Drywall edge protection has a width of 48mm/1.9in, a diameter of 155mm/6.1in in one roll, and a total length of about 70m/76.5yd, which is suitable for modifying and filling corners and wall gaps, as well as repairing door seams and desktop edge cracks. Please note: Production is based on the diameter of a roll, not the total length, so lengths will vary.

Characteristics: The high-quality paper joint tape from is suitable for filling plasterboard and for bridging cracks and holes, and is ideal for filling inside corners Very high tear resistance, very thin, therefore requires little application. Cracks are stabilized and prevented with the paper joint tapes Instructions for use: 1.Cut the ribbon to the appropriate length - If necessary, bend it along the embossing until the desired angle is reached. 2.Apply a thin layer of plaster of paris to the intended area and stick the tape over it 3.Level with a spatula to remove excess mixture and air bubbles 4.Cover with a thin layer of plaster of paris and allow to dry 5. Sand out any unevenness with sandpaper and repeat the plastering if necessary Drywall joint tape can be used for: + Joining K-G panels - permanently connects the panels, preventing the formation of cracks and scratches + Caulking inside and outside corners - saves time + Quickly create and maintain a durable, aesthetic and straight corner + Covering cracks - mending existing imperfections Specification: Name: Drywall Wall Joint Tape Material: Kraft paper One roll diameter: 155mm/6.1in Total Length: Approx. 70m/76.5yd Width: 48mm/1.9in Thickness: 1mm/0.04in Weight: 400g/0.88lbs Package included: 1 Roll * Drywall Wall Joint Tape