Tbest Inductive Car, Educational Toy, Mini Engineering Vehicle, Line Following, STEM Learning, for Kids, Parents, Schools, Playtime, Classroom

• [Effortless Operate] The tank is powered by 4 x button cell batteries (included) for easy setup and use.
• [Novelty Design] This is a novelty inductive car that follows the line for hours of fun playtime.
• [Automatic Line Following] If you place the inductive car toy somewhere else it would run in circles only until it finds the line.
• [Optical Sensor Technology] The car toy has an optical sensor that reads the black line drawn on a white piece of paper.
• [Auto Movement] Turn on the power switch and watch the car toy move automatically along the drawn line for endless entertainment.

Product description Spec: Material: Environmental ABS Random color delivery Size: body length: about 7cm Power supply: 4* button cell (included) Ability development: logical thinking, imaginative creation, organizational ability, hand-eye coordination, hands-on ability Steps: 1. Draw lines on white paper and whiteboard. After the toy car opens the switch (the switch is below), it can sense the black line and run along the line. 2. If the line is too thin, the car may run out of the line. When the car runs to the end of the line, the car will continue to move in the final direction. 3. If the direction is wrong, the battery may be reversed. Please reinstall the battery according to the correct method (the side of the battery must touch the spring in the battery box) 4. Do not place the cart under the sun, under fluorescent lights, or on shiny paper to prevent glare from damaging its sensor. Battery installation: Unscrew the battery slot screw with a screwdriver and insert the button battery according to the +- mark (the battery has a word on the side of the iron or spring loaded). Package List: 1 x Inductive Car Toy 1 x Pen 1 x White paper 4 x Button Battery 1 x Instruction manual Note: Due to the different monitor and light effect,the actual color maybe a slight different from the picture color. Please allow 1-2cm differs due to manual measurement. Directions 1. Draw lines on white paper or whiteboard. Place the toy car on the line and turn on the switch. The car will sense the black line and run along it. 2. If the line is too thin, the car may run off the line. When the car reaches the end of the line, it will continue moving in the last direction. 3. If the car moves in the wrong direction, the battery may be reversed. Reinstall the battery according to the correct method. 4. Do not place the car under direct sunlight, fluorescent lights, or on shiny paper to prevent glare from damaging its sensor. 5. To install the battery, unscrew the battery slot screw with a screwdriver and insert the button battery according to the +- mark. The battery should have a word on the side of the iron or spring loaded.