CUQI for Raspberry Pi Infrared Night Vision IR Camera with Acrylic Holder Case, Adjustable-Focus Webcam for Pi 4/Pi 3 B+/Pi 3, Suit for Home Security Monitors, DIY, 3D Printer

• This Raspberry Pi Infrared IR Camera with acrylic holder case to keep the camera at a stationary angle and it can prevent the camera from loosening and tilting, surprisingly sturdy for its smaller form factor. Note:If it is used during the day, the color of the picture taken by the camera is pink or reddish, which is normal, And You can try to turn off or remove the infrared LED light.
• Simple assembly : the unit is very easy to assemble and unload plus it comes with the tools, There are two holes in the bottom of the bracket for easy attachment to the table or to the wall. The high quality and great performance has great for the price.
• Camera Specifications:The camera is capable of 2592 x 1944 pixel static images, 70 ° diagonal, and also supports 1080 p / 30 fps, 720 p / 60 fps and 640 x480 p 60/90 video recording, with 5MP OV5647 1080p webcam sensor, with HD Resolution and quality image.
• Come with 3PCS heat sink, If the camera working is unstable or the camera is overheated, please tear off the heat sink and stick it , which it has great efficient heat dissipation.
• Widely Application: Recommend this camera can be used for security monitors, drone operation, robot, 3D Printer, DIY experiments etc, and even those wanting to get into stop motion productions.

Raspberry pi camera with holder case, supports night vision, adjustable-focus Raspberry PI infrared night vision camera . Aperture(F): 1.8 Static resolution: 2592*1944 CMOS size: 1/4 500 pixels Focal Length: 3.6MM (adjustable) Field of View: 70 degrees Preferred Sensor Resolution: 1080p Supports connecting infrared LED and/or fill flash LED About Enable Camera and Command Enter into the RASPBIAN system terminal and execute the following statement to get the system update. “sudo apt-get update” “sudo apt-get upgrade” use raspi-config to configure camera port “sudo raspi-config” select “Interfacing Options” -> “Camera”, enable it and reboot system After connect camera to raspberry pi with cable We can use “raspistill -o image.jpg” to take photo, and use “raspivid -o vido.h264 -t 10000” to take video. (PS. 10000 meaning 10s) Raspberry pi camera is good for learning program, monitor real-time experiment and video recording for pi enthusiast and beginner. Note: 1, The Raspberry Pi Infrared Night Vision Camera suit for Raspberry Pi Pi 4/Pi 3 B+/Pi 3, Not suit for Raspberry Pi Zero. 2, Remove the protective film from the lens before use. 3, If it appears flickers or fails to recognize the camera at times, It may be that the infrared light is loose or the power supply is not working properly. Please check it. 4, The product package does not contain the user manual. If you have any questions about the installation, please feel free to contact us. 5,When the IR camera is working for a while, If there is an overheating problem, Please tear off the heat sink and stick it and do not touch the camera with your hand. Package include: 1* IR night vision camera 2* Infrared led light 1* Set Acrylic holder Case with screws 1* 1m FFC Blue&White cable 3* Heat sink(12mm*12mm*3m) 1* Screwdriver