VEATON 400W Electric Submersible Water Pump for Clean Water, Max Flow 11000L/H Compact Utility Pump, Drain Water from Garden Pond Swimming Pool Hot Tub with Float Switch and Hose Connector

• ✅【POWERFUL PERFORMANCE】400W POWERFUL MOTOR ensures effective flow rate up to 11000L/H with 1.25" discharge hose horizontally. This pump has the ability to lift water up to Max. 8 m vertical. This utility pump only works with clean water which contains solid less than 5 mm.
• ✅【SAFETY ENSURE & DURABLE】UPGRADED SEALING STRUCTURE with SILICON CARBIDE gives pump longer durability, which is much longer than regular mechanical seal. Full corrosion-resistant shell and THERMAL PROTECTION ensures the pump will not be burned out, even when the pump triggers the thermal overload protector, the pump will rework after cooling down.
• ✅【AUTO/MANUAL MODE BY FLOAT SWITCH】 Adjust float switch cable length to set pump automatic running by sensing the position of water level. Float switch can also be disabled by attaching it on the side slot, then the pump works manually, it can drain water as low as possible (5mm), and it will keep continuously running and will not turn off automatically, so remember to cut off the power immediately to prevent the motor becoming burned!
• ✅【EASY TO INSTALL】Each pump is equipped with a straight corner connector and flat -angle connector, which allow to connect discharge hose either with thread directly or clamp; includes thread 1", G1", and 1-1/4". The telescopic handle makes the pump more compact and saves storage space.
• ✅【WIDELY APPLICATION】Pump also comes with a 8m long cable cord, which allows pump to submerge deep enough (7m) in the water. Designed for quickly draining water in hot tubs, water tanks, rain barrels, swimming pools, garden ponds, wells etc.
• ✅【BUY WITH CONFIDENCE】Provide lifelong technical consultation and 24h customer service. One-year manufacturer's warranty.

Specifications: — Submersible dirty water pump with float switch — Power: 400W — PP plastic case — Thermal Overload Protection prevents motor burn because of dry running or impeller block — Maximum Capacity of transferring up to 8000L/H and Maximum lift water up to 5m — Removes water down to 5cm— Flat base can allows for pit installation and automatic operation Included in this Package: — Pump (operating with 220V~230V) — Instruction Manual— Adapter fits discharge hose size 1", G1", 1-1/4", and G1-1/2" by using clamp to fix hose or hose thread Ideal for: — It can be used to quickly remove water from pools, ponds, water tank and other large bodies of water — Irrigating Garden — Draining flood from cellars or basements — Powering waterfalls or fountains — Transferring water from unwanted place Tips: — If you want the flow be bigger, the height of the water that you pump out should be lower, and using the 1.5inch discharge port. — The bigger the flow is, the wider the outlet should be — Before starting, tilt the pump to remove all air and wait for 15 seconds— If the water level is not enough height for float switch freely floating, you can hook up the floater at "ON" postion, pump can still work, which means manual operation, but make sure that you never let pump be dry running. Othersiew you risk motor to be burned.