Flat-Pro® Twist-it Tile Levelling System – 2 mm Starter Kit – 300 Screw Clips + 300 Reusable Twisters – for 3–20 mm Tile Thickness

• 👷 Professional tiling tools to eliminate tile lippage and achieve a smooth, even surface.
• 🧰 This starter kit contains 300 screw clips and 300 twister caps to cover a surface area of 33 m² in size 900x600. Consult the calculation table to calculate the area in any other size.
• ✔️ Suitable for tiles and paving slabs between 3 and 20 mm thickness, with a desired joint width of 2 mm.
• 🚫 Do not use on tiles or slabs with a polished surface as there is a real risk of scratching the surface when tightening the Twister. We also advise against using levelling systems on natural stone with hand-cut edges as you will need a minimum joint of 1cm in this case.
• 🏡 When installing 20mm slabs, make sure you use enough clips, especially in the corners. Otherwise you risk breaking the clip prematurely when tightening.
• 💚 You can reuse the twisters after removing them. You can reorder the clips here in bags of 250 pieces in various joint widths.

Get started like a true professional: eliminate tile lippage and achieve a smooth, even result with Flat-Pro Leveling's starter kit. This kit contains a revolutionary new leveling system that eliminates the need for pliers. Instead of the traditional clips, you use screw clips on which you spin a twister to achieve a level surface across the joint. The result is as good as with the traditional system using a wedge, with the extra advantage that you can work much faster. On the lookout for a high-quality levelling system? Then you have come to the right place! Flat-Pro Leveling's clips and twisters excel in reliability: you spin the twister on the screw clip, tighten it and remove them just as quickly by kicking them off with a (safety) shoe or a rubber hammer in the direction of the joint (not perpendicular!). In brief: ▶ Contents: 300 screw clips + 300 twisters ▶ Suitable for tiles between 3 and 20 mm thick - so also for outdoor porcelain! ▶ With a desired joint width of 4 mm ▶ For a floor area of 33 m² in size 900x600 - consult the calculation table for any other size Important tip for smooth use: wait until the next day to remove the clips BUT never wait longer than 24h after installation! Otherwise, you run the risk of the clip not coming off completely due to the cured adhesive. You can reuse the twisters after removing them and in case you need more clips, you can re-order them here in bags of 250 pieces.