FlashBack Iron-On Reflective Tape - Heat Activated Hi Vis Silver Reflective Tape UK (25mm x 100 Metres)

• Apply heat to the back side of the fabric or use a pressing cloth to avoid direct contact with the reflective surface. Recommended temperature: 130–150°C
• Always test on a small area before full application
• Keep out of reach of children — this product is not a toy
• Adult supervision required; not suitable for children to apply
• Application: Place darker side face-down, cover with baking paper and press 10–15s at 130–150°C. Peel clear layer after cooling. (Full instructions in Description.)
• Apparel Type: Non-regulated workwear
• Do not iron tape on garments while they are being worn. Not suitable for use on flame-resistant or protective garments.

1. Place the tape with the darker side face-down onto the fabric. 2. Ensure the lighter, shiny reflective side (with the clear protective layer) is facing up. 3. Cover the tape with baking paper, a cotton cloth, or a Teflon pressing sheet. 4. Set iron to 130–150°C (medium–high / cotton). No steam. 5. Press firmly for 10–15 seconds per section — do not slide the iron. 6. Allow to cool fully, then gently peel off the clear protective layer. 7. Re-press edges if needed. 8. Apply heat to the back side of the fabric if preferred, or always use a pressing cloth to avoid direct contact with the reflective surface. ----------------------------------------------------- Always test on a small area before full application. Keep out of reach of children — this product is not a toy. Adult supervision required; not suitable for children to apply.