Finest Folia 3M Diamond Grade 983 Scotchlite Contour Marking 50mm Reflective Film Reflective Tape (Neon Yellow, 50 Meters)

• Microprismatic reflective film for contour marking of vehicles and trailers with fixed bodies; Width: 5cm; Length: either 1, 3, 8, 15 or 50 meters
• Application: Marking the sides and outlines of trucks and trailers/trailers in accordance with UN ECE 104 for increased visibility and attention
• Strong reflective power even in wet and dark conditions; edges sealed against dirt and moisture; suitable surfaces: rigid and flat to slightly curved; very durable (impact and scratch resistant) and weatherproof; resistant to gasoline fumes, solvents and corrosion
• Dry bonding recommended; Thoroughly clean and degrease the surface beforehand (we recommend isopropanol) so that the adhesive strength can fully develop; Bonding temperature: +15°C to +30°C
• Scope of delivery: Reflective tape (in selected color and length), invoice with VAT shown Climate-neutrally via email"

Product Features The durable, microprismatic, retroreflective 983 Series is designed to outline vehicles for increased visibility and attention in accordance with UN/ECE 104. The 983 Series is coated with a permanent adhesive for bonding to solid surfaces. The film is resistant to petrol fumes and occasional fuel spills. It also reflects when wet. Processing instructions Which surfaces can be bonded to?-Fixed structures-Smooth surfaces-Paint, glass, metal (aluminum)-Plastic (with pre-treatment if necessary)-Tarpaulin structures-New tarpaulins, not older than 6 months-Tarpaulins are difficult surfaces(flexibility, plasticizer, paint application, dirt)-Bonding only on tested surfaces-Cleaning of vehicles with contour markings-Cleaning without the use of steam high-pressure cleaners-Do not use any agents that have an abrasive effect (e.g. nylon brushes)-Do not use solvents (e.g. paint thinner)-Test cleaning agents beforehand-When using high-pressure steam cleaners-maximum pressure = 80 bar-maximum temperature = 60°C-minimum distance of the cleaning nozzle from the surface = 30 cm-maximum deviation of the cleaning jet from the right angle to the surface = 30°-Observe the manufacturer's instructions for the high-pressure steam cleaner