Fiddes & Sons Exterior High Build Wood Oil with UV Filters - 2.5 Litre + 20 Percent Extra Free

Directions Remove any fungal growth, dirt or moss on old wood prior to application and ensure a preservative has been applied. Sand the substrate with a medium 120 grade sanding paper or sanding disc, removing all traces of dust. Apply in dry conditions. Always test on a small area prior to initial application. No primer required. Maximum 2 coats recommended. Stir contents thoroughly before and during use. Apply thinly using a good quality bristle or synthetic brush. Lay evenly, following the direction of the grain. Remove any surplus material immediately with a cloth, carefully checking all areas for excess application. Leave to dry for 4-6 hours or preferably overnight. Lightly sand with a 320 grade paper. Apply as first coat, THINLY, allowing good ventilation. Leave to dry 4-6 hours or preferably overnight.