FAG 51134-MP Axial Deep Groove Ball Bearing

• Single direction axial deep groove ball bearings can support axial forces in one direction
• Double direction axial deep groove ball bearings can support axial forces in both directions
• Bearings of series 522 and 523 have two flat housing locating washers and do not allow angular adjustment
• Axial deep groove ball bearings can be used at operating temperatures from –30 °C to +150 °C, restricted by the lubricant
• Suffixes for available designs

Axial deep groove ball bearings comprise shaft locating washers, housing locating washers and ball and cage assemblies. The bearings are not self-retaining; the ball and cage assembly and bearing washers can therefore be fitted separately. In addition to the series with flat washers, series are also available with spherical housing locating washers for the compensation of static angular misalignment. These designs are normally used in conjunction with seating washers. Axial deep groove ball bearings are available in single and double direction designs. Both designs can support high axial forces but cannot be subjected to radial loads.