Extra Strong Glue for Plastic 8ml + 8g for Manufacturing and Repair of PP PE PTFE Teflon and Silicone Parts

• Primer + Cyanoacrylate glue (super glue) to glue hard-to-bond plastic surfaces.
• Permits gluing surfaces of PP, PE, PTFE, Silicone themselves and to different materials such as metal, stone, glass etc. Can also be used to glue easy-to-bond surfaces (PVC).
• Viscosity: 40cP. Density: 1,1g/cm³. Fills irregularities from 0,1 to 0,15mm. Initial curing time: 5 to 60 seconds. Final curing time: 24 hours. Resistant to temperatures from -55°C to +80°C.
• How to use: The surfaces to be bonded should be cleaned and free of dirt. Apply a thin even coat of primer to hard-to-bond surfaces/Apply 2 to 3 coats of primer to porous surfaces/Do not use the primer on easy to glue surfaces. Leave on for 5 to 8 minutes. Apply a thin layer of glue on one of the surfaces to be glued. Immediately join the elements to be glued, press and hold for a few seconds.
• 1 bottle of primer of 8ml with applicator brush + 1 bottle of glue of 8g with applicator brush.

Product description Technicqll offers a complete and diversified range of Cyanoacrylate-based Super Glue products to meet all your manufacturing or repair needs. These extra-strong, colorless instant glues enable the joining of dissimilar and difficult-to-bond materials, fast curing with very strong adhesion and a wide range of viscosities. Depending on their characteristics, they will allow you to work on rigid or flexible surfaces and to glue metal, rubber, wood, ceramics, cement, plastic, PP, PE, PTFE, porcelain, glass, crystal, leather, plywood, aluminum. The adhesive should be applied to cleaned, degreased and dirt free surfaces. For this, we recommend using the P-102 or P-959 technical degreasers. The cyanoacrylate glue remover will allow you to remove excess and glue residue on surfaces, textiles or your fingers. Since 1985, Nalmat Trzebinia manufactures and distributes adhesives, lubricants and chemical products produced in their factories in Poland under the brand Technicqll. Safety Warning Bonds skin and eyes in seconds. May be fatal if swallowed and enters airways. Keep out of reach of children. If swallowed, Immediately call a poison center or doctor/physician, DO NOT induce vomiting.