EXLECO Mortar Gun Stainless Steel Grout Gun for Mortar Press Mortar Syringe Joint Sprayer with 4 Nozzles 1 Replacement Rubber Piston 1 Spoon Concrete Hand Mortar Pump for Brick Tips and Tiles

• Excellent material: stainless steel ensures that the grout gun does not rust or corrode even after prolonged use in wet and harsh construction environments. Stainless steel caulking guns can withstand higher pressure and heavier loads and are less prone to bending or breaking during use.
• Precise filling: equipped with two different nozzle sizes, the cement joint gun can precisely control the flow of the joint material, ensuring that the joints are filled evenly and tightly. This results in an ideal seal, dust seal and structural reinforcement.
• Maintenance: 1. When first use, if the resistance is too high, add a few drops of oil between the rubber plugs and the pipe wall. 2. After use, rinse with water to prevent the cement mud from drying and remaining in the gun body. 3. After cleaning, put a few drops of oil on the handle and pull it a few times for storage and next use.
• Efficient work: the flared opening makes it easier to fill sealing materials (cement mortar, epoxy resin, sealant, waterproof paint, etc.) into the sealing gun; with the stainless steel spoon, the sealing materials can be conveniently refilled. Make the caulking process more efficient and time-saving.
• USAGE The cement sealing gun can be used for filling building gaps, reinforcement work, sealing treatments, repairing cracks, etc. Such as caulking security doors, door frames, aluminium bed frames, caulking large water surface joints, sealing large water protection projects, grouting and sealing highways, etc.

The cement mortar is sucked in with the help of a vacuum suction cup and thus replaces traditional manual caulking. The cement mortar is removed under pressure and filled into the joints, allowing for quick and effortless filling and a much higher degree of compaction. Note: 1. Adjust the cement or mortar a little thinner than normal. 2. Place the cement at an angle of approx. 45° tilt and pump, please do not pump vertically, it is not easy to pump and needs more effort. 3. If the resistance is too large during the first use, you can drip a few drops of oil between the rubber plugs and the wall of the pipe. 4. Please rinse with water after use to prevent the cement slurry from remaining in the spray gun body after drying. Remove the handle and put it in water for 10 minutes to make it easier to clean. After cleaning, drip a few drops of oil on the handle and pull it a few times to make it easier to store and use better next time. Specifications: Type: mortar sprayer Material: stainless steel. Colour: silver. Frame size: 510 x 205 mm. Nozzle size: Small round mouth: mm Large round mouth: mm Package includes: 1 x mortar sprayer. 4 x nozzles. 1 x replacement rubber piston. 1 x spoon