Exitex Capex Snap Down Gable Finishing Profile - Grey, 3m

• Quick and Easy Fitting - slides into aluminium base bar
• Improved Weather-proofing - helps top cap compression
• Tough and Long-lasting - durable and UV-stable PVC-u
• Highly Versatile - suitable for 10/16/20/25mm roofing
• Maintenance-free - needs no annual painting

GABLE FINISHING PROFILE FOR CAPEX SNAP DOWN Tough PVC-u trim, designed to slide into rail on Capex Snap Down base bar, to allow use as a gable bar. Closes the open side with a drip face, and provides a surface onto which the glazing bar top cap can compress to form a water tight seal. Features an adjustable top, which will pivot to the appropriate height when PVC-u glazing bar top capping is pushed onto the polycarbonate. Features & Benefits Quick and Easy Fitting - slides into aluminium base bar Improved Weather-proofing - helps top cap compression Tough and Long-lasting - durable and UV-stable PVC-u Highly Versatile - suitable for 10/16/20/25mm roofing Maintenance-Free - needs no annual painting Technical Information Colour: White, Brown and Anthracite Grey Width: 21mm Height: 60mm Length: 2.5m (8ft 2in), 3m (9ft 10in), 4m (13ft 1in), and 6m (19ft 8in) Compatibility: Exitex Capex Snap Down Glazing Bar, and 10mm, 16mm, 20mm or 25mm polycarbonate sheets Materials: Plastic PVC-u Fitting Gable Finishing Profile It is assumed that a Capex Snap Down Glazing Bar has been purchased for use with the Gable Finishing Profile. Cut Base Bar and Top Capping to length of polycarbonate Fit rubber gasket to track on one side of Base Bar Pre-drill fixing holes between toothed up-stand Fixings no more than 500mm apart, and within 100mm of ends Screw using 5mm wood screws - ungasketed side to gable Slide profile up base bar, ensuring section has hooked into rail Peel film from edges of polycarbonate and sit in place Position capping over bar and push onto up-stand to seal Fit end closure to polycarbonate Apply silicone under top lip of end cap and push onto capping