Everbuild Silicone Eater Silicone Sealant Remover 100ml Size Cartridge

• Removes silicone from
• Bath , kitchen
• Work tops , basins
• and window frames etc

EVERBUILD SILICONE EATER is a revolutionary product specifically designed to remove all silicone based sealants and surface water repellents - cured and uncured. The product acts by digesting silicone polymers making them easily water or s.olvent rinsable. Benefits Readily digests silicone Ready for use gel - may be used vertically as well as horizontally with no slump. Does not contain halogenated s.olvents, heavy metals, cyanide etc. Water clean up. Low hazard formulation Areas For Use May be used on aluminum* and its alloys, copper and its alloys, iron, steels, glass, ceramics, epoxy composites, most plastics. Has little effect on rubber and other elastomers. Has little effect on most painted surfaces. Limitations *TEST A SMALL AREA BEFORE USE. In all cases, apply a small test patch to an inconspicuous area. Leave for 2 hours min and rinse off. Check for staining/corrosion before attempting the whole job. * May attack nylon, certain fabrics/textiles and coloured anodised aluminum (used as a trim around showers), PU coated (re-enameled) baths, fluoroacrylics, chipped surfaces. Surface Preparation All surfaces must be clean, dry and dust free. Cut away as much as possible of the silicone sealant using a sharp edge. Protect surrounding areas with impervious masking tape Application Cut the tip of the cartridge taking care not to damage the thread. Apply nozzle and cut at an angle of 45o with an opening slightly larger than the gap to be sealed. Apply using a standard sealant gun. Best results will be obtained by keeping an even pressure on the trigger and keeping the gun at a constant angle to the surface being sealed. (a) Removing Silicone sealants from baths/showers etc. Spread the bead over the entire area which requires treatment (use masking tape to protect surrounding areas) A coating of at least twice the thickness of the