Evemodel 20pcs Pre-soldered litz wired Bi-color RED/WARM WHITE SMD Led 0605 DT0605RWM

• Size: It's SMD Led 0605(1.60x1.50mm), The wire is about 20cm(L).
• Forward voltage:2.0V(Red)/3.1V(WARM WHITE), AC or DC Compatible.
• Forward current (typ/max): 15mA/20mA. Viewing angle:130°. Emitting color: RED/WARM White.
• Package included: 20 Pre-soldered with micro litz wired leads Bi-color RED/WARM White SMD Led 0605. 20 resistors (not pre-soldered) for 9~18V operation.
• Brand new. Perfect for small models and really tight places!

Product description Features: 100% Brand new and high quality. Brand new. Perfect for small models and really tight places! Soldering SMDs is very difficult, but these pre-wired units take all the work out of it for the modeler. This kind of soldering is very extensive and difficult to perform, but is offering maximum flexibility when applying the LED and is ensuring place-saving usage. For optimal insulation with minimal outside diameter and at the same time "water-like" softness, translucent grey stranded micro litz wire with only 0.28 mm in diameter is used. The insulation is made from a highly heat-resistant material with a high Teflon-fraction. That´s why during soldering there is almost no longitudinal shrinkage. The wire length is about 200 mm. For easy recognizable connecting, the Cathode is about 10 mm shorter than the Anode. Each Led whith two chips, one in Bright Warm White and one in red, with the Anode in common. Depending on your connecting mode you can use each single colour. Anode in common. Specifications: Brand:evemodel. Size: It's SMD Led 0605(1.60x1.50mm), The wire is about 20cm(L). Forward voltage:2.0V(Red)/3.1V(WARM WHITE), AC or DC Compatible. Forward current (typ/max): 15mA/20mA. Viewing angle:130°. Emitting color: RED/WARM White. Package included: 20 Pre-soldered with micro litz wired leads Bi-color RED/WARM White SMD Led 0605. 20 resistors (not pre-soldered) for 9~18V operation. Directions To use the product, remove the pre-soldered cables from the packaging and connect them to the non-pre-soldered resistors. Then connect the resistors to the desired circuit or power source. Make sure you follow the specified voltage and current specifications to ensure safe and correct operation. Safety Warning Model building item, not a toy. Not suitable for children under the age of 15