EVAPO-RUST® - 5 Lt. - WATERBASED SELECTIVE RUST REMOVER FOR STEEL, IRON, CAST IRON AND CHROME PLATINGS

• Selective distaccante of water-based rust for iron, steel and chrome – Short Term corrosion inhibitor – also removes surface coatings such as bruniture, parkerizzazioni, bluing and zinc phosphate in approximately 30 minutes
• Waterbased selective rust remover for steel, cast iron and chrome platings – short-term corrosion inhibitor – Removes weapon finishes such as bluing, Parkerizing, zinc phosphate, and browning within 30 minutes
• selektive ablösung von Rost auf Wasserbasis für Eisen, Stahl, Gusseisen und chromierungen – Korrosionsschutzmittel für die kurzfristige zwischenlagerung – auch oberflächenbeschichtungen wie brünieren, parkerisierungen, bluing und zinkphosphat werden in etwa 30 Minuten entfernt
• Agent de decollage selectif de la Rouille a base of Eau Pour fer, Acier, Fonte et chromages – inhibiteur de corrosion à Court Terme – même Les revêtements de surface tels Que brunissages, parkérisations, bluing et de Zinc Phosphate seront enlevés en presque 30 minutes
• Removedor selectivo de óxido a base Agua para Hierro, Maple, Hierro Fundido Y cromaduras – inhibidor de la corrosión short Plazo – eliminará acabado azulado Y Otros Tipos De acabados de óxido Como Parkerizing, de Zinc Phosphate Y Browning Dentro De Los 30 minutos

Preliminary cleaning: Remove the possible layer organic and/or inorganic surface coverage of the rust with suitable cleaner and/or Descaler. Immersion/filling: Immerse in bathtub or fill (e.g.: Tank, Thread, etc.) The metal object by decapare For At Least 30 Minutes in case of patina Slim; up to 24/48 hours for the more substantial ecology of rust. If EVAPO-RUST is diluted with water, the indicative MRM Timing is no longer because it increases progressively according to the degree of dilution actually adopted. To prevent the excessive slowdown of the chemical reaction, it is recommended Do not dilute more than 1: 1 ratio (e.g.: 1 lt. EVAPO-RUST + 1 L water). Also if diluted consumption remains unchanged: 1 Lt. of EVAPO-RUST Rust removes up to 60 g of anhydrous. It is recommended to fully immerse the metallic object, because in case of immersion only partial, some pieces may have a dark line in correspondence of the air/liquid interface. In case of rust patina of consistent thickness is essential regularly (every 6/12 hours) rinse and/or brush gently the metal object by decapare or, in the case of the interior of a tank, shake the whole tank containing EVAPO-RUST . Ultrasonic can be used in washing machine. after-treatment: at the end of the metal object before use Wash with the water or any further treatment (e.g.: paints, protective, fuel gas, etc.). In the absence of the final wash with water, EVAPO-RUST evaporando leaves on a transparent protective film anticorrosive metal can inhibit the oxidation Short Term up to 2 weeks (in case of storage Indoor Only). EVAPO-RUST waste (or less) and, if necessary, also the possible solution of washing with water, should be disposed of in accordance with the law at authorised disposal facility.