Epoxy Coloured Sand Floor Paint, Self Levelling High Gloss，Peach Red

• CLEAR QUANTITY GUIDE: Use approximately 1.6 kg/m² on smooth prepared floors or at least 2 kg/m² on rough, porous or unpolished surfaces. Measure the full area before ordering.
• CHOOSE THE RIGHT SIZE: 0.5 kg covers approximately 0.25–0.31 m²; 1 kg covers 0.50–0.63 m²; 2 kg covers 1.00–1.25 m², depending on surface condition.
• MIX AND APPLY: Add the supplied curing agent to the coloured-sand base, mix thoroughly and spread evenly within the approximately 30-minute working time.
• REALISTIC CURING GUIDE: Allow 24–48 hours before light foot traffic and at least 72 hours before water or vehicle exposure; temperature and thickness affect curing.
• DECORATIVE HARD-FLOOR FINISH: Creates a glossy marble-style texture on properly prepared concrete, cement, ceramic tile and marble in garages, patios, basements and bathrooms.
• garage resin coating concrete flooring patio basement workshop bathroom tile marble stone decorative terrazzo anti slip weather resistant driveway utility room

IMPORTANT QUANTITY GUIDE This is a thick epoxy coloured-sand floor coating, not conventional thin floor paint. Approximately 1.6 kg is required per square metre on smooth, properly prepared surfaces. Rough, porous or unpolished floors may require at least 2 kg per square metre. APPROXIMATE COVERAGE 0.5 kg: 0.25–0.31 m² 1 kg: 0.50–0.63 m² 2 kg: 1.00–1.25 m² 4 kg: 2.00–2.50 m² Measure the complete project area before ordering. Surface porosity, preparation, application thickness and material loss can affect final coverage. HIGH-GLOSS DECORATIVE FINISH The coloured aggregate creates natural veining and a glossy marble-style appearance. Once fully cured, the coating provides a durable, moisture-resistant and slip-resistant finish for everyday household and workshop use. APPLICATION GUIDE 1. Remove dust, oil, grease, loose material and moisture. 2. Repair cracks and ensure the floor is clean and completely dry. 3. Add the supplied curing agent to the coloured-sand base. 4. Mix thoroughly until the texture and colour are uniform. 5. Spread the mixture evenly within the approximately 30-minute working time. 6. Allow 24–48 hours before light foot traffic. 7. Allow at least 72 hours before water exposure or vehicle traffic. SUITABLE SURFACES Designed for properly prepared concrete, cement, ceramic tile and marble surfaces in garages, workshops, basements, utility rooms, patios and bathrooms. IMPORTANT NOTES Test on a small inconspicuous area before completing the full project. Actual colour, pattern, coverage and curing time may vary according to batch, surface condition, temperature, humidity and application thickness.