Fuhuihe MPPT30A+MT50+RTS

• MPPT 30A Solar Controller support for 4 type Battery charging: Lead-acid (Sealed, AGM, Gel, Flooded), User and Lithium). Battery temperature compensation function to ensure the controller’s life. It protect the battery from being over-charged by the solar modules and over-discharged by the loads.
• This MPPT Controller protection built-in against reverse polarity, overcharging, over-discharging, overload, short-circuiting, and reverse current. It protect the battery from being over-charged by the solar modules and over-discharged by the loads.
• Maximizing the energy from solar panels to charge your system.Negative Ground Controller featuring advanced MPPT technology with high tracking efficiency up to 99.5% and peak conversion efficiency of 98%.
• The use of internationally renowned brands ST, IR high-quality, low-loss devices to extend product life. Standard Modbus communication protocol based on RS485 communication bus, communication distance more longer
• EPEVER MPPT solar charge controller, 30A 12V/24V auto work, Max PV 100V, Max solar panel input power: 390W charge for 12V battery / 780W charge for 24V battery .Common negative ground design. Battery type: Lead-acid, Lithium and User-defined .( Sealed /GEL(AGM)/Flooded; LiFePO4/ Li[NiCoMn]O2 ; User ), (AGM battery setting same as GEL parameters, or more accurate parameters follow battery factory advice by User type ).

Product Specification : Model: Tracer3210AN Rated charge current: 30A Max. PV input power: 390W/12V for battery system, 780W/24V for battery system Battery voltage range: 8V~32V Max. PV open circuit voltage: 100VDC Grounding : Common negative Battery type :Lead-acid, Lithium and User-defined .( Sealed /GEL(AGM)/Flooded; LiFePO4/ Li[NiCoMn]O2 ; User ), (AGM battery setting same as GEL parameters, or more accurate parameters follow battery factory advice by User type ) Tracking efficiency : ≥99.5% , Max. conversion efficiency :98% Working environment temperature : -25℃～+50℃(100% input and output) Temperature: -20°C -- +70°C/-4°F -- 158°F LCD backlight time : 60S (Default) RS485 interface:5VDC/100mA Terminal: 6AWG(16mm 2 ) Recommended cable: 8AWG(10mm 2 ) Package List: 1 x 30A Tracer3210AN Solar Charging Controller 1xMT50 1xRTS 2 x User Manual(English)