EPAUTO Spill Proof Radiator Coolant Filling Funnel Kit

• Allows color matching of caps for dedicated adapters.
• Cooling System fill kit prevents spills and trapped air. Trapped air pockets may cause erratic cooling system and heater performance.
• 5†Extension Bar and 45° Elbow allow access to caps under shrouds or at an angle.
• USPTO Patent No: US10519019B2

Warning: Do not open the lid when the cooler is hot! Hot liquid can leak out and cause burns. The package includes: lid funnel, 45 degree angle x 2 liquid plugs, 5 inch straight extension, large cap A, medium cap B, small cap C, thread cap D, large adapter A with gasket, medium adapter B with gasket, small adapter C with gasket, thread cap, adapter D with gasket for GM thread cap adapter E with gasket for Ford Instructions: 1. First install the adapter with the right size in the correct cap. Place the seal down. Tighten the cap with the adapter to ensure that nothing leaks. 2. If a 45° angle or extension is required, place the funnel after the angle or extension is well placed in the adapter opening. 3. Fill the funnel slowly and carefully with coolant to about a third. 4. When the motor is running with the funnel attached, the liquid level should be low. Keep the speed idle. (Turn off the engine if you notice that the liquid level rises excessively. Wait until the liquid level has dropped before starting the engine again.) 5. Squeeze the liquid stopper together and release it so that the remaining liquid in the funnel flows to the radiator hose. 6. When finished, remove the funnel (and/or extension/contra-angle) and adapter and seal the cooler tightly with the cap.