R3 Screen Protector Compatible for Canon EOS R3 /R5 Camera (2 TOP &2 LCD Screen), KOMET Tempered Glass Flim Anti-Bubble Anti-Fingerprint Anti-Dust Anti-Scrach

• 📷 [R3 Screen Protector] Perfectly Fits for canon eos R3 R5 digital camera top & lcd glass screen, including touch screen.(2PCS Top Screen+2PCS LCD Screen)
• 📷 [High-Transparency] 99%High definition& High sensitivity, 9H tempered glass, 0.3mm thickness, 2.5D edge corner, You can't even tell it has a screen protector on it.
• 📷 [9H Hardness] bubble-free anti-scratch anti-fingerprints, cover to edge, works great prevent sudden damage,protect your precious camera screen.
• 📷 [4-Packs] You Will Get: 2 x LCD Screen Glass Film, 2 x Top Screen Glass Film 4 x Wet Cleaning Paper + 4 x Dry Cleaning Paper. 4 x Dust-absorber. 1 x Installation instruction.
• 📷 [Easy to apply] easy to install, professional design,no air bubbles, after cleaning the screen, tear off the back film, align the four corners, and then put it down. press gently in the middle, and the protective film will automatically stick to the screen.

Description Thank you for purchasing this excellent screen protector. I will guide you through the installation and answer any questions by email,The process is divided into four steps: 1) cleaning your touch screen by using the green "1" (wet) and red "2" (dry) wipes. Touch ONLY the edges of the screen with your fingers since the oil from your fingers may cause problems. 2) remove dust from your touch screen with the blue "dust absorber" stickers. These are really sticky, and you should hold them only by the end or tab--not the middle. Use the straight stickers for the edges of your screen, and the round sticker for the main part of the screen. 3) (please see included diagram) separate the protective screen--the THICK screen, which will soon be applied to your touch screen--from the THIN protective layer. Hold on to the black tab and pull gently from one corner diagonally across to the opposite corner OR straight across if you're really good with your hands. Now you have the solid screen protector ready to apply. Again, handle the screen ONLY by its edges, and place it carefully on your clean touch screen. As you apply GENTLE pressure to the surface of your touch screen protector, you will see the screen turn from gray to black, showing that contact has been made. 4) Wipe gently , using a SOFT cloth (not paper towels, since they can scratch) from the center outward until your new screen protector is attached completely to your touch screen. You now have protected your touch LCD screen from potential harm.Congratulations! Package Content: 2X Tempered Glass Film for Canon EOS R3 R5 LCD screen. 2X Tempered Glass Film for EOSR3 R5 TOP screen. 4X Wet Cleaning Paper. 4X Dry Cleaning Paper. 2X Dust-absorber.