ENQIMAOYI RF Mini Wireless Remote Controller,DC5V-24V 12A LED Strip Controller LED Tape Light Dimmer Receiver for Single Color 3528 5050 2835 5630 LED Strip Lights

• Dynamic mode : 5 Dynamic Effects( gradual change , Signal light , strobe , breathe , candlelight ), 10-Level Dimmer ,256-Grade PWM, Auto Save Function
• Note: The initial mode of the controller is set one-to-many, and you can refer to the manual to achieve one-to-one control through code pairing.
• Mini RF Remote Controller for 5050 3528 5630 3014 Single Color LED Strip Lights
• RF remote control led Dimmer can control brightness of led strip, flashing, and flashing mode.
• Package includes:1x RF wireless remote,1x Mini LED dimmer controller,1x DC jack,1x DC plug

Specifications: Working voltage: DC 5~24V Working current: 12A Working temperature: -20 to +60°C RGB control: 1 output channel Remote control mode: RF Wireless Remote frequency: 433.92MHz Remote di stance: >15m at open area Working mode: 1 TO 1 MATCHED: 1 remote controls only 1 receiver at the same time. 1 TO MANY MATCHED: 1 remote controls many receivers at the same time. NOTE: The initial state of the product is 1 to multiple control modes, which can be used immediately after booting. 1.Press and hold both SPEED- and SPEED+ buttons at the same time for a long time (3-5s) until the light bar flashes,indicates a successful. 2.Press and hold SPEED+ and the Red Switch Button at the same time until the light bar blinks,indicates a successful. 3.Press and hold SPEED+ and LIGHT Button at the same time until the light bar blinks,indicates a successful. Instructions: 1. Power Supply This unit accepts DC 5V to 24V power supply. The red cable should be connected to positive and black cable to negative. 2. LED Output The red cable should be connected to LED positive and black cable to negative. The peak output current is 12A, please reduce load if main unit is overheating. 3. Remote Control RF Remote RF wireless remote signal can pass through barrier, so you don't have to point the remote straightly to the receiver/controller as you do with IR remote. Package includes: 1x RF wireless remote 1x Mini LED dimmer controller 1x DC jack 1x DC plug