Emuca - Drawer Kit for Kitchen or Bathroom with Included Boards, Total Extraction Slides, Soft Closing, 178mm (7 inch) Height for 600mm (23,6 inch) Module and 500mm (19,7 inch) Depth, Anthracite Grey

• Hardware kit necessary for mounting a drawer of 178 mm height and depth of 500 mm, except for the drawer front, for modules with a width of 600 mm and a side thickness of 16 mm.
• Possibility of adjusting the width of the drawer to the width of our module by cutting the boards that are included in the kit.
• Synchronized total extraction runners, with soft closing and load capacity of 40 kg.
• Adjustment of the front: ±2mm in vertical and ±1mm in horizontal.
• Made of anthracite gray painted steel and chipboard with melamine of the same color.

Kitchen and bathroom drawer kit with all the necessary elements for assembly. It is the optimal solution for your kitchen, bathroom or cupboards with an elegant design in anthracite grey. Each kit consists of all the elements required to mount an external drawer with a height of 178 mm, a depth of 500 mm and a module width of 600 mm. It includes: two side rails, a set of soft closing guides, a set of trim covers, floor and back boards and the fasteners for the drawer front. All you need is the front panel with the required dimensions of the drawer. The side panels are made of steel with anthracite grey lacquered surface and allow you to adjust the drawer front 2 mm vertically and 1 mm horizontally. The guides are full extension with soft closing and a load capacity of up to 40 kg. The boards for the floor and back are made of chipboard with anthracite grey colour and have a rough surface to achieve greater surface resistance. The boards are 16 mm thick and are cut to fit standard modules of 600 mm width (549 x 490 mm for the bottom side and 526 x 148 mm for the back). However, can be cut to match the width of the module required. Discover the complete Emuca range in our store: www. . de/ emuca