Emuca - Drawer kit for Kitchen or Bath with 3D Regulation, Height 83mm (3,27 inch), Depth 350mm (13,7 inch), 40Kg (88 lb), Soft Close, Boards not Included, Steel, White

• Kit of fittings needed to assemble an exterior drawer with a height 83mm (3,27 inch) and depth 350mm (13,7 inch) apart from the front, back and bottom.
• Sized for a board thickness of 16 mm (0,62 inch) for the bottom and back of the drawer.
• Synchronized total extraction runners, with soft closing and load capacity of 40 kg (88 lb)
• It has a 3D front adjustment: vertical by means of an eccentric of ±2 mm, horizontal ±1 mm, inclination -1,5/+4 mm
• Made of steel and painted in white.

Kit for Vertex drawer with 3D regulation with all the necessary elements for its assembly. It is the optimal solution for your kitchen, bathroom or wardrobe furniture, with an elegant design, which requires a high load capacity and large interior volume capacity. The drawer front can be adjusted ±2mm vertically, ±1mm horizontally and inclination -1,5/+4mm. Each kit consists of all the necessary elements for the assembly of a drawer in modules sized for a board thickness of 16 mm for the bottom. Units include: two side ribs, a pair of runners with soft closing, a set of cover plates and the fixings for the front of the drawer. The runners are full pull-out synchronised with soft closing, allowing a maximum load of 40 kg (88 lb) The metal side sides are made of Steel with a painted finish in anthracite grey, grey or white.