Eltako FLD61 Wireless Actuator PWM LED Dimmer Switch

• Wireless actuator PWM LED dimmer switch
• Bus system dimming actuator
• Bus system radio bus
• Extension input
• Dimmer

PWM dimmer switch for LED 12-36VDC, up to 4A. Stand-by loss only 0.Feb-00.4 watts. Minimum brightness and dimming speed adjustable. With nursery and snooze switch. In addition, with light scene control via PC or with radio buttons. Encrypted radio, bi-directional radio and repeater function can be switched on. For installation 45 mm long, 45 mm wide, 33 mm deep. Supply voltage 12 to 36V DC, depending on the connected LED lighting. Output voltage PWM (pulse width modulation). Maximum output current 4A. An impulse-resistant DC power supply is required, which provides the required voltage and current of the LED lamp(s). Universal control voltage 8..230V UC, galvanically separate from the supply and switching voltage. The set brightness level remains stored when switched off (memory). In the event of a power failure, the switching position and the brightness level are stored and if necessary switched on when the supply voltage is restored. Automatic electronic overload protection and overtemperature shutdown. Encrypted sensors can be learned from the manufacturing week 11/14. It can be turned on bi-directional radio and/or repeater function. With the upper % lamp rotary switch, the minimum brightness (fully dimmed) can be adjusted. In the LRN position up to 35 radio buttons are assigned, including one or more central control buttons. With the lower dim speed rotary switch, the dimming speed can be adjusted. In addition to the radio control input via an internal antenna, this dimmer switch can also be controlled locally as a universal button with a conventional universal voltage control button installed in advance. This allows the dimming direction to be changed by interrupting the control.