Eltako 4830342 dimmer Switch, EUD61NP-230V

• Item Package Quantity: 1
• Package Weight: 40.82 grams
• Model Number: 4830342
• Package Dimensions (L x B x H) in cm: 9 x 6.8 x 2.4

Universal dimmer switch 230 V without N connection. Without N connection, power MOSFET up to 400 W. Standby loss only 0.5 Watt. With control inputs for light button and light switch. For flush mounting. L x W x D: 45 x 55 x 18 mm. Universal dimmer switch for R, L and C loads up to 400 W, depending on the ventilation ratios. Automatic detection of load type R+L or R+C. ESL Energy-saving bulbs cannot be used with dimmers without an N connection. Control voltage: 230 V. Minimum load: 40 W. Circuit at zero crossing with soft-on and soft-off for lamp protection. With the percentage rotary switch, the minimum brightness (fully dimmed) can be adjusted. With the dim-speed rotary switch, the dimming speed can be set. At the same time the duration of soft-on and soft-off is changed. Short control commands turn on/off, permanent control changes brightness to the maximum value. A break in the control changes the dimming direction. The set brightness level remains stored when switched off (memory). In the event of a power failure, the switch position and the brightness level is stored and is turned back on when the supply voltage is restored. Automatic electronic overload protection and overtemperature shutdown. In the event that light switches cannot be replaced by light buttons, there is a separate control input for light switches: The closed switch is opened briefly again, then dimmed until it is opened briefly again. Changing the dimming direction is automatically done at the two vertices. In addition, the direction can be changed by opening the switch twice briefly. With children's room circuit (only when controlled with button): When switched on with a longer push on the button, after approx. 1 second with the smallest brightness and as long as you continue to be touched, slowly dim up without changing the last brightness level. With snooze switch (only when controlled with button): With a double pulse, the lighting is dimmed and switched off from the current dimming position to the minimum brightness. The maximum dimming time of 60 minutes depends on the current dimming position and the set minimum brightness and can therefore be shortened accordingly. Short buttons can be switched off at any time during the dimming process. A long button during the dimming process dims up and stops the snooze circuit. Without an N connection, therefore suitable for mounting directly behind the light button or light switch, even if there is no N connection. L loads (inductive loads, e.g. wound transformers) and C loads (capacitive loads, e.g. electronic transformers) must not be mixed. R loads (resistive loads, e.g. 230 V incandescent and halogen lamps) can be mixed as desired.