Eltako ESR12DDX UC Multifunction Power Puncture Schaltrelais

• Item Package Quantity: 1
• Model Number: 4991828
• Package Weight: 997.9 grams
• Package Dimensions (L x B x H) in cm: 9 x 6.6 x 2.4

Eltako 1 + 1 contact, potential-free, 16 A/250 V AC, incandescent bulbs 2000 W. Stand-by loss only 0.03-0.4 watts Row installation device for mounting on DIN EN 60715 TH35 mounting rail. 1 pitch unit = 18 mm wide, 58 mm deep. With the patented Eltako Duplex (DX) technology, the normally potential-free contacts when switching 230 V AC voltage 50 Hz Zero crossing and thus drastically reduce wear. Simply use the Connect N conductors to terminal (N) and L to 1(L) and/or 3(L). This results in an additional standby loss of only 0.1 watts. Universal control voltage 8..230V UC. Supply voltage such as the control voltage. The functions are entered according to the instruction manual with the mode and set buttons. and digitally displayed on an LCD display, if necessary also locked. The accrued switch-on time is constantly displayed. First in hours (h) and then in months (m) with a decimal place. Thanks to the use of bistable relay, there is no Coil power dissipation and no heating as a result. After installation, wait for automatic short synchronisation before switching consumers are placed on the net. Only for the impulse switch functions: In the event of a failure of the supply voltage, each after setting is switched off or the switching position is retained (then + in the display next to the function abbreviation). Setting at RSM in the display guide. In addition, The control inputs A1 and A3 can be used as Central control inputs are defined: ZA1 = 'centrally off' with A1, local with A3; ZE1 = 'centrally on' with A1, local with A3; Z00 = no central control. 'Central on' with A1, 'centrally off' with A3 and no local Control see function RS. In the relay functions, since production 3. Week 2010 (03/10), for feedback with the switching voltage of a dimmer switch. From 110 V control voltage and in the settings 2S, WS, SS and GS. Glow lamp current up to 5 mA, depending on the ignition voltage. With the mode and set buttons, you can choose between 18 functions: OFF = Duration OFF. 2xS = 2-way impulse switch with 1 N/O contact, control inputs A1 and A3. 2S = impulse switch with 2 contacts. WS = impulse switch with 1 N/O and 1 opener. SS1 = series switch 1 + 1 NO contact with switching sequence 0 - contact 1(1-2) - contact 2(3-4) - Contacts 1 + 2 SS2 = series switch 1 + 1 N/O contact with switching sequence 0 - contact 1 - contacts 1 + 2 - contact 2. SS3 = series switch 1 + 1 N/O contact with switching sequence 0 - contact 1 - contacts 1 + 2. GS = group switch 1 + 1 N/O contact with switching sequence 0 - contact 1 - 0 - contact 2. RS = switch with 2 contacts, with A1 = set and A3 = reset control input. 2xR = 2-way switching relay with 1 N/O contact, control inputs A1 and A3. 2R = switching relay with 2 contacts. WR = switching relay with 1 N/O and 1 opener. RR = switching relay (quiescent current relay) with 2 openers. EAW = on/off wiper relay with 1 + 1 N/O contact, wiping time 1 s each. EW = switch-on wiper relay with 1 N/O and 1 opener, wiping time 1 s. AW = switch-off wiper relay with 1 N/O and 1 opener, wiping time 1 s. GR = group relay 1 + 1 N/O contact (relay with alternating closing contact). ON = Duration ON Except for 2xS, 2xR and RS, the control inputs A1 and A3 have the same function, unless used as central control inputs. After setting the desired function, it can be locked. One arrow on the right. In addition to the function abbreviation in the head of the display, indicates the locking state.