Eltako Bus Switch Actuator FSR14 2x RS485

• Package dimensions (L x W x H): 9.0 cm x 6.8 cm x 1.8 cm
• Package Weight: 79.904g
• Switching devices, power supplies and electronic electricity meters
• Number of packs: 1

Surge switch relay with 2 channels, 1+1 contact, potential-free, 16A/250V AC, bulbs 2000W, with DX technology. Bi-directional Standby loss only 0.1 watts. Modular device for mounting on support rail DIN-EN 60715 TH35. 1 division unit = 18 mm wide, 58 mm deep. Connect to Eltako RS485 Bus Cross wiring bus and power supply with bridge. With the patented Eltako Duplex technology, the normally potential-free contacts can still switch in zero passage when switching 230 V AC voltage 50 Hz and thus drastically reduce wear. Simply connect the N conductor to the terminal (N1) and L to 1(L) and/or N to (N2) and L to 3(L). This results in an additional stand-by loss of only 0.1 watts. In the event of the supply voltage failure, the switching status is retained. In the event of recurring supply voltage is defined. The channels can be independently learned as an ES and/or ER channel. Scene control: with one of the four control signals of a button learned as a scene button with double rocker, multiple channels of one or more FSR14-2x can be switched on or off at a scene. Central commands on the PC are sent with the building radio visualization and control software GFVS. Learn one or more FSR14-2x on the PC. With the rotary switches, the buttons are learned and if necessary, the 4 channels are tested. For normal operation, the middle and lower rotary switch are then set to AUTO The upper rotary switch may be For all channels, the EW time (0-120 seconds) for relay or the RV time (0-120 minutes) for impulse switch.