ElekTek Unswitched Lamp Holder B22 BC Bayonet Cap & Shade Ring with Solid Cast Brass Hook for Ceiling, Bracket or Chain Suspension - Made in UK - Brass

• B22 BC Bayonet Cap UNSWITCHED Lamp Holder with Hook - suitable for bulbs up to 200W
• Maximum diameter 32mm, Height 90mm, through-hook 7mm cable aperture capacity - intended primarily for suspending from chain or 'hook-to-hook' from a Ceiling Rose or Bracket
• Internal locking screw mounted in a separate riveted & threaded base ensuring your lighting does not come apart with use (beware of cheaper, pressed type bases that cannot carry a locking screw) - loosen screw, thread onto existing threaded fitting and tighten locking screw before wiring
• Integrated hollow EARTH terminal, EARTH wire connects from the inside so no wires are visible externally. Hand assembled - easy to separate for fitting: simply remove the thin shade ring by unscrewing anti-clocwise; hold base with the Earth terminal pinched between thumb and index finger and unscrew thicker lower ring by unscrewing anti-clockwise. When re-assembling ENSURE ceramic insert is aligned correctly in base & body alignment slots are aligned with ceramic insert
• Made in the UK to all current UK & EU electrical standards

Premium quality solid brass UNSWITCHED Lamp Holder with 20mm Accessory Hook. Maximum diameter 32mm, Height 90mm. B22 Bayonet Cap with Shade Ring, Flameproof ceramic insert with Brass plunger contacts and screw wiring terminals. Internal locking screw mounted into the riveted & threaded base ensuring your ElekTek fitting does not come loose with use (beware of cheaper, pressed type bases that cannot carry a locking screw) - loosen screw, thread onto existing threaded fitting and tighten locking screw before wiring. Integrated hollow EARTH terminal - EARTH wire connects from the inside, so no wires are visible externally. Intended primarily for suspending from chain or 'hook-to-hook' from a Ceiling Rose or Bracket. Hollow bodied-hook for cable/flex (7mm cable capacity). Suitable for lighting circuits only, T2 temperature rating (220°C) - Made in the UK WARNING: All electrical work should be undertaken by persons competent in the wiring and installation of these items. If in any doubt, please consult a qualified electrician.