Opaltool Electric Rivet Gun Adapter with Aluminum Casting Housing and a Non-Slip Handle for Cordless Drill Electric Riveting Riveter Insert Tool

• Material: The electric rivet gun is fully metal forged and has high working strength. The alloy steel forged gun head has high hardness, saving time and effort.
• Fast Speed: Not easy to slip back nails, fast speed and high efficiency, design of three-claw nail anastomosis for 360-degree scratch nail, riveting smooth without burrs, three-piece structure are not easy to get stuck.
• Labor-saving: This electric rivet nut gun adapter more labor-saving than manual and more convenient than pneumatic.It is a good helper for your home and work.
• Vertical Grip Handle: The handle is made of hard plastic with anti-slip lines, which is not easy to slip with vertical grip.
• Clamp: The three-claw clamp with hardening and quenching treatment is more wear-resistant, and the service life of the transfer joint is prolonged.

Specification: Color: Black Material: Alloy Steel Gun Adapter Length: 150mm Hex Shank Diameter: 6.35mm(1/4in) Wrench Length: 150mm Grip Length: 122mm Usage: Draw 2.4 / 3.2 / 4.0 / 4.8mm core-pulling rivets Installation: Step 1: Insert the electric drill into the conversion chuck, the gear should not be too high. Step 2: Rotate the electric drill clockwise and clamp the chuck to the locking chuck. At this time, the electric drill rotates the rivet gun counter-clockwise and emits "dripping" sound into the rivet. Step 3: Put the electric drill into the rivet needle in time for the right hole position. Step 4: Remove the electric drill counterclockwise from the rivet. Operating Instruction: 1. Rotate and clamp rivet gun clockwise, it must be clamped until it does not shake 2. Choose a suitable aperture, leave a slight space of swing between the rivet shank diameter and aperture 3. Turn counterclockwise to push the three-jaw chuck in the rivet gun to the top end, then put in the rivet, and then turn it clockwise to clamp the rivet. You can try it by hand, stop till the rivet will not move. 4. After the rivet is installed, turn the hand drill clockwise to pull a rivet in an instant 5. Turn the hand drill counterclockwise to easily remove the nail 6. Turn counterclockwise to loosen and remove the adapter Package Includes: 1 x Riveting Gun Adapter 1 x Handle 1 x Wrench 4 x Rivet Head